Users Guide

Fabric OS Command Reference xxv
53-1002921-02
• islShow - This command displays “D_PORT” if the D_Port mode is enabled on an ISL.
• lsCfg - Added the -force and -qsfp operands. The domain ID is displayed in the --show
command output.
• lsDbShow - The command is enhanced to display the
• nbrStateShow - The command is enhanced to display the port substate.
• passwdCfg - Added the -reverse operand to activate password reverse criterion check. The past
passowrd value is between 0 and 24 and the default is 0.
• perfTTmon - The maximum of 32 flows are displayed for the Brocade 6505 and Brocade 6520
switches.
• portAddress - The --show command displays a new column “User_bound” to indicate whether
the area for the port index is user bound. “Y“ indicates user bound. “–” indicates implicit
bound.
• portBeacon - The command does not allow to beaconing of Inter Chassis Link (ICL) ports, GE
ports, FCoE ports, 10G ports, and embedded internal ports.
• portCfg - fciptunnel and fcipcircuit - Added the -g | --failover-group operand to set the failover
group ID for a circuit.
• portCfgCompress - Compression is not supported on Condor 3 Inter-Chassis Link (ICL) ports.
• portCfgDPort - Added the -dwdm operand to disable the DWDM mode on a port.
• portCfgEncrypt - Encryption is not supported on Condor 3 ICL ports.
• portCfgEXPort - This command does not display the encryption and compression states for the
ICL EX_Ports.
• portCfgOctetSpeedCombo - The command is enhanced to support 10 Gbps FC speed
configuration on all ports of a 16 Gbps-capable blade or switch.
• portCfgPersistentDisable - Added the -r operand to disable a port persistently with a disable
reason.
• portCfgQoS - On Condor 3 ICL ports, QoS is not configurable and it is enabled by default.
• portCfgShow - Added the Sim Port and E_Port Credits fields. Updated the command syntax.
• portCfgSpeed - Corrected the command syntax.
• portCfgTrunkPort - This command is supported in Access Gateway mode.
• portDisable - Added the -r operand to disable a port with a disable reason.
• portDPortTest - This command is enhanced to display the complete D_Port test results on the
responder switch. Added the D_Port test failure example.
• portLedTest - Added the -uports operand to specify a set of user ports to test. You cannot
interrupt the test by pressing the return key (<cr>).
• portLoopbackTest - Added the -uports operand to specify a set of user ports to test. You cannot
interrupt the test by pressing the return key (<cr>).
• portName - When FICON Management Server (FMS) mode is disabled, specifying the same
port name for multiple ports is permitted.
• portPerfShow - A port that is marked with an asterisk (*) in the output indicate that it is a SIM
port. Corrected the command syntax.
• portShow - This command displays the configured failover group ID for circuits.
• portStatsShow - The stat_ftx and stat_frx fields display class 2, class 3, and control frames
transmitted and received. The compression_ratio is based on the last 5 second sampled
accumulated value. It is represented in percentage.