Setup Guide

Brocade Fabric OS Message Reference 801
53-1004119-01
XTUN-1996
5
XTUN-1996
Message FTRACE buffer <FTRACE Trace Buffer Number> on slot <FX8-24/SX6 Slot Number (0 for
7800 and 7840)> DP <FX8-24/SX6/7840 DP Number (or 0 if 7800)> has been cleared.
Message Type LOG
Severity INFO
Probable Cause Indicates that a CLI command or supportSave operation freed the trace buffer back into the FTRACE
free pool.
Recommended
Action
No action is required.
XTUN-1997
Message FTRACE buffer <FTRACE Trace Buffer Number> on slot <FX8-24/SX6 Slot number (0 for
7800 or 7840)> dp <FX8-24/SX6/7840 DP number (or 0 if 7800)> has been triggered.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a programmed trigger event has been detected.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.
XTUN-1998
Message FTRACE buffer <FTRACE Trace Buffer Number> has been cleared.
Message Type LOG
Severity INFO
Probable Cause Indicates that a CLI command or supportSave operation freed the trace buffer back into the FTRACE
free pool.
Recommended
Action
No action is required.