Service Manual

Replacing the Bluetooth Card

1. Follow the instructions in Before You Begin

2. Align the screw hole on the Bluetooth card with the screw hole on the system board.

3. Replace the screw that secures the Bluetooth card to the system board.

4. Connect the Bluetooth-card cable to the connector on the system board.

5. Follow the instructions from step 4 to step 7 in Replacing the Palm Rest.

6. Replace the display assembly (see Replacing the Display Assembly).

7. Replace the macro keyboard (see Replacing the Macro Keyboard).

8. Replace the keyboard (see Replacing the Keyboard).

9. Replace the center control cover (see Replacing the Center Control Cover).

10. Replace the base cover (see Replacing the Base Cover).

11. Replace the battery pack (see Replacing the Battery Pack).

Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.