Users Guide

Before Working Inside Your

Alienware Graphics Amplifier

CAUTION: To avoid damaging the components and cards,

handle them by their edges and avoid touching pins and

contacts.

NOTE: The images in this document may differ from your device

depending on the configuration you ordered.

Before You Begin

1 Disconnect your device and all attached devices from their electrical

outlets.

2 Disconnect all cables such as telephone cables, network cables and so on,

from your device.

3 Disconnect all attached peripherals, such as keyboard, mouse, monitor,

and so on, from your device.

Safety Instructions

Use the following safety guidelines to protect your device from potential

damage and ensure your personal safety.

WARNING: Before working inside your device, read the

safety information that ships with your device. For more

safety best practices, see the Regulatory Compliance home

page at dell.com/regulatory_compliance.

WARNING: Disconnect all power sources before opening the

device cover or panels. After you finish working inside the

device, replace all covers, panels, and screws before

connecting to the power source.

CAUTION: To avoid damaging the device, make sure that the

work surface is flat and clean.