Users Guide

About your monitor | 11
Rear and bottom view
Rear and bottom view without monitor stand
7 Regulatory label Lists the regulatory approvals.
8
Lighting dock connector When the stand riser is attached to the
monitor, the
dock connector supplies
power to the light on the stand.
9
Cable-management slot (at the
back of
the stand)
To organize cables by routing them
through this slot.
10 I/O cover Protects the I/O ports.
Label Description Use
1
Power connector Connect the power cable (shipped with your
moni
tor).
2
USB upstream port Connect the USB cable (s
hipped with your
monitor) to this port and your computer to
enable the USB ports on your monitor.
3
USB 3.0 ports (2) Connect your USB device.*
NOTE: To
use these ports, you must connect
the USB cable (shipped with your monitor) to
the USB-upstream port on the monitor and to
your computer.
4
USB 3.0 port with
Power Charging
Connect to charge your USB device.