Computer Hardware User Manual
Table Of Contents
- Owner’s Manual
- Contents
- A Tour of Your Computer
- Setting Up Your Computer
- Using a Battery
- Installing Module Bay Devices
- Using CDs, DVDs, and Other Multimedia
- Using the Keyboard and Touch Pad
- Using PC Cards
- Setting Up a Home and Office Network
- Solving Problems
- Dell Diagnostics
- Drivers
- Resolving Software and Hardware Incompatibilities
- Restoring Your Operating System
- Drive Problems
- E-Mail, Modem, and Internet Problems
- Error Messages
- IEEE 1394 Device Problems
- Keyboard Problems
- Lockups and Software Problems
- Memory Problems
- Network Problems
- PC Card Problems
- Power Problems
- Printer Problems
- Scanner Problems
- Sound and Speaker Problems
- Touch Pad or Mouse Problems
- Video and Display Problems
- Adding and Replacing Parts
- Appendix
- Index
Using PC Cards 41
Installing a PC Card
You can install a PC Card in the computer while the computer is running. The computer
automatically detects the card.
PC Cards are generally marked with a symbol (such as a triangle or an arrow) to indicate which end
to insert into the slot. The cards are keyed to prevent incorrect insertion. If card orientation is not
clear, see the documentation that came with the card.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
To install a PC Card:
1
Hold the card with its orientation symbol pointing into the slot and the top side of the card
facing up. The latch may need to be in the "in" position before you insert the card.
2
Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and
try again.
.
The computer recognizes most PC Cards and automatically loads the appropriate device driver.
If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD
that came with the PC Card.