Service manual

Removing the display cable

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your

computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery.

2 Remove the optical drive.

3 Remove the base cover.

4 Remove the hard drive.

5 Remove the wireless card.

6 Remove the keyboard.

7 Follow the procedure from step 1 to step 7 in ”Removing the computer

base".

8 Remove the display assembly.

9 Remove the display bezel.

10 Remove the display panel.

11 Remove the display hinges.

Procedure

1 Disconnect the camera cable from the connector on the camera module.

2 Peel off the tape that secures the camera cable to the display back-cover.

3 Note the camera cable routing and remove the camera cable from the

display back-cover.