Service manual

3 - 28
Chapter 3 Removal and Replacement Procedures (RRPs)
Finisher Service Manual
Version 1 2009.03.31
4. Replacement Steps
Replacement 1 PWBA MAIN A4FIN (PL14.4.12)
Use a wrist strap to protect the PWB from electrostatic damage.
1) Replace the PWBA MAIN A4FIN to the FINISHER ASSY, and then secure with the five screws (sil-
ver, flanged, 6mm).
2) Engage all the connectors of the PWBA MAIN A4FIN.
Go to the next replacement step:
Replacement 2 COVER REAR (PL14.3.3)