User's Manual

3 - 131
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP5.12 OUTPUT TRAY ACTUATOR (PL5.4.2)
[Removal]
1) Remove FRONT COVER. (RRP1.3)
2) Sag the midsection of OUTPUT TRAY ACTUATOR, remove the left and right shafts through
the mounting holes.
[Replacement]
1) Sag the midsection of OUTPUT TRAY ACTUATOR, fit the left and right shafts through the
mounting holes.
2) Attach FRONT COVER. (RRP1.3)