User's Manual

c.
d.
Turn on the printer.15.
NOTE: The printer will automatically detect the attached tray(s) but will not detect the paper type.
Print a Printer Settings page to verify the optional 500-sheet tray module or 1000-sheet tray module is
installed correctly.
Press Menu.a.
Reports/List appears. Press or .b.
Printer Settings is displayed. Press .
The Printer Settings page is printed.
c.
Verify that 500-Sheet Tray Module and 1000-Sheet Tray Module are listed in the printer
settings under Printer Options.
d.
16.
If the tray modules are not listed, turn off the printer, unplug the power cable, and reinstall the
optional 500-sheet tray module and 1000-sheet tray module.
After loading paper in the optional tray, specify the paper type from the printer operator panel.
Press until the paper type for the installed tray appears, and then press .a.
17.
If you installed the optional 500-sheet tray module and 1000-sheet tray module after installing the
printer driver, update your driver by following the instructions for each operating system. If the printer
is on a network, update the driver for each client.
18.