User's Manual

Press the middle button, SELECT, once Envelope is displayed on the lower line, this puts a * by it.9.

Now we have the MPF Size set to Envelope.10.

Now press MENU to get back to Tray Settings/Paper Size.11.

Press to get to Paper Type.12.

Press to select Paper Type.13.

Press to get to MPF.14.

Press to select MPF.15.

Using and , select the appropriate paper type (Plain 1).16.

Press SELECT, once Plain 1 is displayed on the lower line.17.

Now we have the MPF Type set to Plain 1.18.

Now press MENU to get back to Ready to Print19.

Now insert the Envelope-sized stack of paper into the MPF.20.

On the screen MPF/Envelope will appear.21.

Press SELECT to confirm this.22.

Now on the screen MPF/Plain 1 will appear.23.

Press SELECT to confirm this.24.

We now have all the hardware settings on the printer correct25.

Now, all software settings screen shots are from WORD, this was done in Word 2003. However if in any

application, you go File Print and then click the Properties button, you will get this same driver

properties window.

Open up Word and create a new document.26.

Go to File Print.27.

Select the Dell Color Laser Printer from the printers list28.

Click the Properties button to the right.29.

This brings up Driver Properties.30.

Click on the Paper Tray Tab.31.

Change the Paper Source to MPF.32.

Click the Print Setup Tab.33.

Select in paper size, Envelope.34.

35.