User Manual

Selecting Pre-Punched Paper
When selecting pre-punched paper for the printer:
Test paper from several manufacturers before ordering and using large quantities of pre-punched paper.
Paper should be punched at the paper manufacturer and not drilled into paper already packaged in a ream. Drilled
paper can cause jams when multiple sheets feed through the printer. This may result in a paper jam.
Pre-punched paper can include more paper dust than standard paper. Your printer may require more frequent
cleaning and feed reliability may not be as good as standard paper.
Weight guidelines for pre-punched paper are the same as non-punched paper.
Transparencies
You can load up to 75 sheets of transparencies in the MPF for a single print job. It is recommended that you try a sample
first before buying large quantities of any print media.
When printing on transparencies:
Set the paper type to Transparency from the printer driver to avoid damaging your printer.
Use transparencies designed specifically for laser printers. Do not use regular transparencies. Transparencies must
be able to withstand temperatures of 205°C (401°F) without melting, discoloring, offsetting or releasing hazardous
emissions.
Avoid getting fingerprints on the transparencies. This may result in poor print quality.
Before loading transparencies, fan the stack to prevent sheets from sticking together.
Non-white transparencies are not supported with the printer.
Selecting Transparencies
The printer can print directly on transparencies designed for use in laser printers. Print quality and durability depend on
the transparency used. It is recommended that you try a sample first before buying large quantities of any print media.
The paper type setting for the MPF should be set to Transparency to help prevent jams. (See "
Tray Settings" for detailed
information about this setting.) Check with the manufacturer or vendor to determine whether your transparencies are
compatible with laser printers that reach temperatures as high as 205°C (401°F). Only use transparencies that are able to
withstand these temperatures without melting, discoloring, offsetting, or releasing hazardous emissions.
Envelopes
Depending on the choice of envelopes, it is possible to expect variable levels of light wrinkling. It is recommended that you
try a sample first before buying large quantities of any print media. See "
Loading the MPF" for instructions on loading an
envelope.
When printing on envelopes: