Troubleshooting

Values:
Off* No tray size substitute accepted.
Larger
Size
Substitutes paper of next largest size. When there is no larger paper size, the printer substitutes paper of
nearest size.
Nearest
Size
Substitutes paper of nearest size.
MPF Feed Substitutes paper from the MPF.
mm/inch
Purpose:
Specifies the default measurement unit displayed after the numeric value on the operator panel.
Values:
millimeter (mm) Selects millimeter as the default measurement unit.
inch (") Selects inch as the default measurement unit.
NOTE: The default for mm/inch varies depending on other settings, such as Country and Document Size.
Odd Page 2Sided
Purpose:
Specifies how the odd last page is printed when using duplex printing.
Values:
1 Sided* Prints the odd last page upside down to the paper.
2 Sided Prints the odd last page in normal direction to the paper.
Maintenance
Use the Maintenance menu to initialize the NV (non-volatile) memory, configure the plain paper quality adjustment
settings, and configure the security settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
F/W Version
Purpose:
To display the printer's firmware version.
Service Tag
Purpose:
To display the printer's service tag.
Paper Density
Purpose: