Printer User Manual

196 Dell Printer Configuration Web Tool
Job Completed Tone Sets the volume of the tone that is emitted when a
job other than a copy job is complete, or disables
the tone.
Fault Tone Sets the volume of the tone that is emitted when a
job ends abnormally, or disables the tone.
Alert Tone Sets the volume of the tone that is emitted when a
problem occurs, or disables the tone.
Out of Paper Tone Sets the volume of the tone that is emitted when the
printer runs out of paper, or disables the tone.
Low Toner Alert Tone Sets the volume of the tone that is emitted when the
toner is low, or disables the tone.
Auto Clear Alert Tone Sets the volume of the tone that is emitted 5 seconds
before the printer performs auto clear, or disables
the tone.
Base Tone Sets the volume of the tone that is emitted when the
operator panel screen returns to the default setting
by scrolling the loop menu, or disables the tone.
All Tones Sets the volume of all the alert tones, or disables all
the tones.
mm / inch Sets the measurement unit to be used on the
operator panel screen as either mm or inches.
Default Print Paper Size Sets the default print paper size.
Auto Log Print Specifies if a job history needs to be printed after
every 20 jobs.
Print ID Sets where to print the user ID on the output paper.
Print Text Sets whether the printer outputs PDL data (which is
not supported by the printer) as text when the
printer receives it.
Banner Sheet Insert Position
*1
Sets where to insert a banner sheet in the output.
Banner Sheet Specify Tray
*1
Sets from which tray a banner sheet is fed.
RAM Disk
*2
Sets whether to allocate RAM for the file system for
the Secure Print and Store Print features.
Substitute Tray Sets whether to use another size paper when the
paper that is loaded in the specified tray does not
match the paper size settings for the current job.