Owner`s manual
18 | Replacing the Stand
Replacing the Stand
WARNING:
B
efore working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 11. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Slide the tabs on the stand into the slots on the back cover.
2 Replace the screws that secure the stand to the chassis.
Postrequisites
1 Replace the stand cover. See "Replacing the Stand Cover" on page 16.
2 Follow the instructions in "After Working Inside Your Computer" on page 11.
book.book Page 18 Thursday, April 11, 2013 12:21 PM