Owner`s manual

34 | Removing the Wireless Mini-Card

Removing the Wireless Mini-Card

WARNING: Before working inside your computer, read the safety information that

shipped with your computer and follow the steps in "Before You Begin" on page 9.

After working inside your computer, follow the instructions in "After Working

Inside Your Computer" on page 11. For additional safety best practices information,

see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery. See "Removing the Battery" on page 12.

2 Remove the base cover. See "Removing the Base Cover" on page 20.

3 Remove the keyboard. See "Removing the Keyboard" on page 17.

4 Remove the palm-rest. See "Removing the Palm-Rest" on page 30.

Procedure

1 Disconnect the antenna cables from the wireless mini-card.

2 Remove the screw that secures the wireless mini-card to the system board.

1 screw 2 antenna cables (2)

3 wireless mini-card

book.book Page 34 Friday, December 14, 2012 3:32 PM