Owner`s manual

h) hard drive
i) hard-drive cage
j) WLAN card
k) display hinge
l) palmrest
m) system fan
n) ExpressCard cage
o) system board
p) speakers
3. Perform the following steps:
a) Remove the screw that secures the LED cover.
b) Un-route the status-light board cable from its channels.
c) Remove the screw that secures the status-light board and lift to remove the status-light board
from the computer.
Installing the Status-Light Board
1. Place the status-light board on its place on the computer.
2. Connect the status-light board cable to its connector.
3. Tighten the screw to secure the status-light board on the computer.
4. Place the LED cover on the status-light board.
5. Install:
36