User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
Page 26 Proprietary Data P/N 300SC30031 Rev. 1.2
4.2.3 CONFIGURING THE FILTERS
The DMSB Management Tool enables selecting up to a total of 24 filters for the 700
and 800 bands and provides five available configuration options to choose from
(downlink routing). The default downlink routing setting is
12 filters for 700MHz, 12
Filters for 800MHz
. Upon initial installation there are no filters listed and they must
be added. In addition, when the user re-routes the system, the filter assignment map
is deleted and must be reset.
To configure the required filters
Note: The number of filters that can be defined depends on the selected DL Routing
configuration (see 4.2.1 step 4). For example, if the 12 filters for 700MHz, 12 Filters for
800MHz option was selected then the maximum number of filters that can be added for
each band is 12.
1. Click the Filters tab of the Setting window, the following window appears.
Figure 14. Filters Tab
Note: The filter configuration for the 700 and 800 bands is performed for each one in
their corresponding windows.
2. To add a filter, click the Add/Edit Filter button. The following window appears.