Installation guide

© 2000 Directed Electronics, Inc. Vista, CA 41
feature menus
Factory default settings are indicated in bold in the following feature tables.
FEATURE DEFAULT - LED ON SETTING LED OFF SETTING
NUMBER (PRESS CHANNEL 1) (PRESS CHANNEL 2)
2-1 Engine checking ON Engine checking OFF
2-2 Tachometer checking type Voltage checking type
2-3 12 minutes run time 24 minutes, 60 minutes run time
2-4 Flashing parking light output Constant parking light output
2-5 Cranking time 0.6 sec. (1)* Cranking time 0.8 (2), 1.0 (3), 1.2 (4), 1.4 (5),
1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9) sec.*
2-6 High voltage check level Low voltage check level
2-7 Auxiliary output - factory alarm disarm Auxiliary output - special accessory
2-8 Normal status output Factory re-arm output
2-9 Anti-Grind ON Anti-Grind OFF
*NOTE: The numbers in parentheses indicate the number of times the LED will flash.
menu #2
FEATURE DEFAULT - LED ON SETTING LED OFF SETTING
NUMBER (PRESS CHANNEL 1) (PRESS CHANNEL 2)
1-1 Active arming Passive arming
1-2 Chirps ON Chirps OFF
1-3 Ignition controlled door locks ON Ignition controlled door locks OFF
1-4 Active locking Passive locking
1-5 0.8 second door lock pulses 3.5 second door lock pulses
1-6 Double pulse unlock OFF Double pulse unlock ON
1-7 Channel 2 output - Delayed validity (1)* Channel 2 output - Instant validity (2)/
latched (3)/latched reset with ignition (4)/
30-second timed (5)/second unlock (6)*
1-8 Factory alarm disarm with Channel 2 ON Factory alarm disarm with Channel 2 OFF
1-9 Code Hopping ON Code Hopping OFF
*NOTE: The numbers in parentheses indicate the number of times the LED will flash.
menu #1