User's Manual

User Guide P. 7
Remote’s advanced functions and MENU table:
Display Description
PARK
(1)
Parking meter countdown
This version of the countdown feature is particularly useful for keeping track of
parking meter time: the user may quickly set up the countdown using the
Parking
Menu
. The transmitter will beep 6 times, 5min before the Parking countdown reaches
0 and beeps 6 times once the countdown expires.
Through Advanced Options, first press
to select MENU, then:
a. Choose PARK and press
.
b. Set the time at which you want set the alarm. First set the hour, and
press . Then set the minutes and press .
c. Choose ON and wait. A flashing “P” and
will appear on the
screen to confirm activation.
ALARM
(2)
Alarm Clock
The LCD remote control has a built-in alarm clock, which can be set up using the
Alarm Clock Menu. Once the programmed time is reached, the remote will beep 6
times every minute until a button is pressed.
Through Advanced Options, first press
to select MENU, then:
a. Choose ALARM and press
.
b. Set the time at which you want to set the alarm. First set the hour,
and press . Then set the minutes and press .
c. Choose ON and wait. A flashing “A” and
will appear on
screen to confirm activation.
CWM
(3)
Cold weather mode function:
Through Advanced Options, first press to select MENU, then:
a. Choose CWM and press
.
b. Choose ON/OFF, then press and hold until icon
appears/disappears.
VALET
(4)
Valet functions: (see page-12 for details)
1) Through Advanced Options, first press to select MENU, then:
a. Choose VALET and press
.
b. Press
or to select three kinds of Valet Modes:
i. CMVLT = Combo Valet
(Starter and alarm are disabled)
ii. VLTST = Valet Start
( Only the starter is disabled)
iii. VLTAM = Valet
(Only the alarm is disabled)
c. Once the selection is done, press
d. Choose ON/OFF, then press and hold
until;
i. The
icon appears/disappears to confirm Combo
Valet activation/deactivation.
ii. The
icon appears/disappears to confirm Valet start
activation/deactivation.
iii. The
icon appears/disappears to confirm Valet Alarm
activation/deactivation.
TSTAR
(5)
Time start function:
This feature is used to remote start the car at a pre-programmed time. Once the pre-
programmed time is reached, the remote will send a start command to the car