Owner's Manual

Dejjnitive

Technolpgy®

The

Leader in High-Performance

LoudspeakersTM

ProCinema™Series Pivotin Wall

Mount

STEP 1

Unscrew the Clinching Ring and remove the Ball Pivot from

the Wall Bracket.

Clinching Ring

Ball Pivot

Wall Bracket

STEP 2

Fasten the Ball Pivot to the 1/4-20 threaded receptacle on

the back of your loudspeaker. Tighten with a wrench.

STEP 3

Using the Wall Bracket as a template, mark the hole positions

on the wall where you wish to mount the loudspeaker.

Drill, and install the Wall Bracket using fasteners (not

provided) and methods appropriate to the wall structure

encountered.

you are mounting on the wall

and

notscrewing

into a stud, you should use anchored toggle

bolt

moly

bolt type fasteners. Tighten fasteners securely.

STEP 4

Connect audio cables to the loudspeaker. Place the Clinching

Ring over the Ball Pivot (narrow opening toward the

loudspeaker). Holding the loudspeaker securely, insert the

Ball Pivot into the Wall Bracket. Tighten the Clinching Ring

onto the Wall Bracket. It is recommended that you install a

security cable (not provided) between the loudspeaker

and

Wall Bracket security loop. This Wall Mount is

not

used to support weight exceeding 8

lb.

Security Loop

Lock Washer

Q::nnnm>

- -