Installation and Owner's Manual Deer Valley NOTE: Drawings may not exactly define contour of the product. www. deervalleybath.
IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING DANGER To reduce the risk of electrocution: 1. Do not use while bathing. 2. Do not place or store product where it can fall or be pulled into a tub or sink. 3. Do not place in or drop into water or other liquid. 4. Do not reach for a product that has fallen into water. Unplug immediately.
SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. DANGER Improper use of the grounding plug can result in a risk of electric shock.
Prior to Installation: ® Inspect toilet seat to ensure no damages have occurred while in shipping. @® Observe all plumbing and building codes in accordance with your state and local requirements. General Recommendations: Please read installation and maintenance instructions thoroughly before installing the toilet seat. Be sure to use proper tools and always wear proper personal safety accessories for your protection.
o Installation and Deer Valley Owner's Manual 1. Important Safe Guards IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: GROUNDING INSTRUCTIONS This product must be grounded. In the event of an electrical short circuit, a grounded product reduces the risk of electric shock.This product is equipped with a cord having a grounded wire with a grounded plug.
° Installation and Deer Valley Owner's Manual Please carefully read this manual before use and keep for future reference. The following icons are used in this manual to indicate varying verities of hazards. Please abide by these precautions, otherwise serious consequences may occur. NOTATION WARNING Please pay close attention to avoid serious harm or accidents. ATTENTION not attentive, body or property damage may result. Caution! Comply with guidelines.
° Installation and Deer Valley Owner's Manual Make sure the power supply is grounded. Otherwise, electric shock may occur. Please consult qualified electrician or serviceman if the power supply is not grounded. Do not place lit cigarettes or other ignited items on the product. Otherwise, fire may occur. Do not touch or plug in the cord with wet hands. Otherwise, electric shock may occur. Do not place lit cigarettes or other ignited items on the product. Otherwise, the device may be damaged or malfunction.
o Installation and Deer Valley Owner's Manual Unplug and clean the dust on the power cord with a dry cloth regularly. Otherwise, fire may occur due to bad insulation. Individuals who are handicapped (physically, mentally, or emotionally) must be accompanied during use. Otherwise, prolonged use may cause low temperature burns. Do not forcefully pull, break, bend, strip, twist, or over squeeze the power cord and cable. Otherwise, electric shock or fire may occur. Children should not play with this product.
o Installation and Deer Valley Owner's Manual Do not urinate on the product. Otherwise, electric shock may occur. Do not use polluted water supply. Otherwise, the water may damage the device or harm the user. If using any chemical toilet bowl cleaner, be sure to wipe up any spills that spas onto the plastic areas of the product. Do not use any acidic chemical detergent. Only neutral detergents are permitted. Otherwise, the plastic may break and cause body damage, electric shock, or fire.
° Installation and Deer Valley Owner's Manual Do not expose to direct sunlight or heating device. Please make sure the user is fully seated. Otherwise, the cleaning or drying function will stop. Do not use a timer power source or external switch to turn the device on/off. The thermal cutoff device may cause danger. Please turn off the water supply before replacing the filter. Firmly attach the filter before opening the water supply. Otherwise, leakage or fire may occur. Do not urinate on the nozzle.
o Installation and Deer Valley Owner's Manual /\ WARNING During power failure, unplug the device and close the water supply valve to prevent leaking. In very low temperatures, the water within the device may freeze after ong periods of disuse. To avoid damage, please warm the unit to melt the ice. Warning To reduce the risk of burns, electrocution, fire, or injury; 1. Close supervision is necessary when this product is used by, on, or near children. 2.
o Installation and Deer Valley Owner's Manual 2. Product Installation (1) Tools needed Adjustable Wrench (1.02in+ width) OR Open End Wrench Phillips @ Screw Driver N >1.02in OR \ (2) Parts included Smart Bidet (1 set) Catch Plate (1 pc) Screw components (1 sets) Adjustment Plate Metal Washer ~ > Inflated tube Hose (1 pc) Owner's Manual Fixed Card (1 pc) AAA Battery(2 pcs) A Remote Control IS ) N= After opening the package, please confirm that you have received all parts listed above.
o Installation and Deer Valley Owner's Manual 3. Parts Diagram (1) Product overview Caution Label Steel Mesh Filter Lid Power Cord Dryer Door Nozzle (Posterior & Feminine Wash) Heated Seat Water tank inlet T-valve Existing water pipe LT] Water Valve \ Ay) X Existing Toilet Bowl Bf ~~ Side Buttons (+1) 312-626-9466 -10www deervalleybath.
Installation and Owner's Manual Deer Valley* (2) Control panel H/C Massage Front Wash J Automatic Clean Nozzle Position Warm / Co d Massage + Nozzle Oscillation Clean your front Flush after defecation Clean your rear Adjust the nozzle position (back and forth) oo a Hic Massage Night Light 7 ona Clean Deer Valley* (| J J Water Diver Saar Temp. Temp. Temp.
° Installation and Deer Valley Owner's Manual (3) Before Installation Power Require me » The power rating should be within the required range (AC 120V + 10%, Max current 10A above) » The power outlet should be close enough to reach the power cord (47.24in) but far from where water can hit it. » This product must be grounded. » The wiring should be installed by a professionally licensed electrician. » Please do not plug in the product before installation is complete to prevent malfunction.
o Installation and Deer Valley Owner's Manual 4. Installation The Smart Toilet Seat (1) Remove the existing toilet seat. (2) Insert the inflated rubber tube set into the ® Remove the toilet seat mounting bolts. mounting holes on the toilet bowl. ® Remove the existing toilet seat from the toilet. Half spherical washer oo Mounting holes Sliding washer Twist to loosen (3) Place the Fixed Card on the toilet bowl (4) Install the Catch Plate where the mounting holes are. Make sure ® Cover with a metal washer.
o Installation and Deer Valley Owner's Manual (5) Install the smart toilet seat ® Remove Fixed Card. ® Press the push rod button and slide the seat into the Catch Plate. ® Adjust the position of the seat and loosen the screws to adjust position, if necessary. Slide seat towards back of toilet Push rod button (+1) 312-626-9466 -14www. deervalleybath.
o Installation and Deer Valley Owner's Manual 5. Installation Steps (cont.) eo Install the filter and hoses 7 1. Connect T-valve to tank. 2. Existing water pipe connect T-valve. T-valve 3.Connect the hose to T-valve. 95 T-valve = Hose e Turn on the water e Link the power 1. Turn the water back on by turning the knob 1. Insert the bidet plug into the outlet (120V). on the supply angle valve counter-clockwise until the valve is fully open. 2.
° Installation and Deer Valley Owner's Manual 6. Functions e Basic Functions » Functions will only work when user is seated on the bidet seat. » Dryer will automatically stop after 4 minutes. Rear Wash » Function: Water sprays » Function: Water sprays. from the nozzle to wash the from the nozzle to wash the front (for Women). posterior. » To Activate: Press “Front Wash” » To Activate: Press "Rear Wash” button once. Press button button once. Press button twice to activate oscillating spray.
Deer Valley* Installation and Owner's Manual e Basic Functions (cont.) Automatic Clean » Function: When seamstress the auto posterior wash,the bidet will start posterior washrags) dryer (4 press the button again the 90s,it will skip to drying. » Automatic functions like posterior wash and drying are particularly suited for kids and elders. Dryer Temp » Function: Adjust dryer temp. » To Check Temp: Press button once and the current temp will appear on the indicator.
o Installation and Deer Valley Owner's Manual e Dryer » Dryer will automatically stop after 4 minutes. e Other Functions H/C Massage » Function: Alternate water temp of spray between cold water to hot water in turns. » To Activate: While in wash ee button once. the dryer. Deer Valley Automatic dauntless Aegean —) 1 Water Dryer Seat Temp. Temp. Temp. Nozzle Clean » Press the "Nozzle Clean"use when the nozzle is extended for manual cleaning.
o Installation and Deer Valley Owner's Manual 7. Maintenance e¢ Maintenance » Before maintenance, please unplug the power source and shut off the water supply. » Regular maintenance is required to ensure that the product operates at optimum efficiency. Maintenance of Lid, Seat, and Plastic Parts » Wipe the lid, seat, and plastic parts with a wet soft cloth (water). » Please wipe with water frequently or the product will become hard to clean later if the dirt and debris is not removed on time.
° Installation and Deer Valley Owner's Manual e Maintenance (cont.) not spray water or detergent on the bidet, remote While cleaning the plastic parts, do not use strong, control, or power cord. acidic chemical cleaners (concentrated sulfuric acid, » Otherwise, electric shock or fire may occur.
Deer Valley: Installation and Owner's Manual 8. Product Operation e Troubleshooting » If you experience any of the problems below, please follow the suggested solutions. If you continue to experience issues after trying the solutions, please consult with a qualified electrician or serviceman.
Installation and Owner's Manual Deer Valley: e Troubleshooting (cont.) Possible Solutions Dryer temp. is set to OFF Turn up dryer temp. to higher setting Dryer is not warm Dryer is broken Contact us Dryer stops during use Dryer will stop every 4 mind | Enable dryer again Possible Solutions Seat temp. is set to OFF Turn up seat temp. to higher setting Seat temp.
Deer Valley: Installation and Owner's Manual e Specifications Model Number F1W535 Rated Voltage AC 120V, 60Hz Rated Power 1050W Environmental Temp Water Inlet Environment Minimum necessary 0.08MPa, and also make sure the water flow is above The range of water water pressure inlet pressure Maximum water pressure 0.8MPa (in a static condition) Flushing Way for heating Transient heating Temp pf warm water Off/about The length of power line 47.24in The size of product 20.4in x 16.14inx 5.
° Installation and Deer Valley Owner's Manual e Model Comparison Chart Unlimited wash Rear wash Front wash Aerated wash Auto wash Oscillating wash H/C massage Adjustable water pressure Adjustable water temperature Adjustable nozzle position Detachable nozzle Nozzle self-cleaning Cleaning Nozzle Heated seat Warm dryer Soft close Adjustable seat temperature Adjustable dryer temperature Night light Instant heating Seat sensor Memory mode Auto-start SUS filter Air isolation UV Sterilization Anti-bacterial seat
Deer Valley* ONE YEAR LIMITED WARRANTY Phone: (+1) 312-626-9466 Address: 2645 Maricela St Torrance, CA 90503 Email: Web: www.deervalleybath.com LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY Deer Valley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.
