DS2 Setup Guide

Dedicated Micros ©2007
64
DS2
Text Background
A black box appears by default behind the text. However it is possible to switch this box off.
Sequence Dwell
The sequence dwell time can be set from 1 to 99 seconds. The dwell time is the length of time a
camera is displayed before switching to the next camera in the sequence.
Tip:
The cameras on the sequence can be edited by pressing and holding the Sequence button
in Live mode.
Multiscreen interlace
The Multiscreen Interlace parameter can be used to eliminate icker on a multiscreen display.
Multiscreen titles
Camera titles can be removed when viewing in a multiscreen display.
Display unit number
When multiple units are controlled from a single keyboard (e.g. using a VS16 video switch), the unit
number (in the System Options page) is displayed on screen so the operator knows which unit they
are controlling.
Base camera number
When using multiple units, it may be preferred that the camera numbers are offset, for example,
with two units the rst unit would be camera 1 to 16 and the second 17 to 32, etc. This is for display
purposes only.