Installation Guide

1. Main Body of the Storage

2. 4 Feet

Step 1.

Step 2.

Step 3.

Step 4.

Now turn the storage up to right side.If the storage

is not stable enough,please adjust the feet to make it

stable.

WARNINGS!

IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.

6 Drawer Storage Assembly Instruction

BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION

CAREFULLY. PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID

ASSEMBLY DIFFICULTY.

COMPONENTS:

Take all packaging off the storage.Turn main body

of the storage upside down, so it is lying flat on the

floor.Make sure the ground is clean and smooth.

Slightly screw one foot to the bottom of the storage

body and gently tighten the foot. Make sure the foot

is tightened enough.

Slightly screw the other three feet one by one to the

bottom of the storage body and gently tighten the

feet. Make sure the feet are tightened enough.

PAGE 1
6 Drawer Storage Assembly Instruction BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION CAREFULLY. PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID ASSEMBLY DIFFICULTY. COMPONENTS: 1. Main Body of the Storage 2. 4 Feet Step 1. Take all packaging off the storage.Turn main body of the storage upside down, so it is lying flat on the floor.Make sure the ground is clean and smooth. Step 2. Slightly screw one foot to the bottom of the storage body and gently tighten the foot.