Instructions / Assembly

1. Table Top

2. 4 Wooden Legs

3. Bottom Board

4. 4 Feet

Step 1.

Step 2.

Step 3.

Ste

Step 5.

Step 6.

Step 7.

IF SPILLAGE OCCURS WIPE CLEAN WITH SLIGHTLY DAMP CLOTH IMMEDIATELY.

WARNINGS!

Console Table Assembly Instruction

BEFORE YOU DO THE ASSEMBLY, PLEASE READ THIS ASSEMBLY INSTRUCTION

CAREFULLY, PLEASE FOLLOW THIS INSTRUCTION FOR ASSEMBLY TO AVOID

ASSEMBLY DIFFICULTY.

COMPONENTS:

Take all packaging off the console table.Turn table

top upside down, so it is lying flat on the floor,

make sure the ground is clean and smooth.

Put the bottom board over the end of the four legs,

slightly adjust the wooden legs so the screw holes on

the legs are lined with the holes on the bottom

board.

Screw one leg to the bottom of the table top and

gently tighten the leg.Do not screw the leg too tight.

Screw the other three wooden legs one by one to the

bottom of the table top and gently tighten the legs.

Do not screw the legs too tight.

Slightly screw one foot through the bottom board to

connect with the wooden leg.

Slightly screw the other three feet one by one

through the bottom board to connect with the

wooden legs.

Now turn the table up to right side.If the table is

not stable enough,please adjust the legs and feet to

make it stable.