Owner's Manual

Filter Coffee Maker
5
Using for the first time
Before using the machine for the first time, wash all the
accessories in warm soapy water and rinse. For the best tasting
coffee the internal circuits must be flushed through at least twice.
To do this, follow the instructions in the paragraph “How to
prepare the filter coffee” without using ground coffee.
Installation
• After removing the packaging, make sure the product is
complete.
• If in doubt, do not use the appliance and seek the Customer
Service authorised by the manufacturer. See enclosed
guarantee leaflet.
• The packaging (plastic bags, polystyrene foam, etc.) should be
kept out of reach of children as they are a safety hazard.
• Place the appliance on a work surface far away from water taps,
basins and sources of heat.
• After positioning the appliance on the work top, leave a space
of at least 5 cm between the surfaces of the applian
ce and the
side and rear walls and at least 20 cm above the coffee maker.
•Never install the appliance in environments where the
temperature may reach 0°C or lower (the appliance may be
damaged if the water freezes).
• Make sure the mains voltage corresponds to the voltage
indicated on the appliance rating plate.
Connect the appliance to an efficiently earthed socket with a
minimum current rating of 10A only.
The manufacturer may not be considered liable for possible
in
cidents caused by the failure to adequately earth the mains.
• If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
Setting the clock into the mains socket
Plug the appliance into the mains socket. When the coffee
machine is connected to the outlet for the first time, “0:00”
appears on the display. To set the time, press the SET CLOCK
button and keep it pressed until the correct hour is displayed, then
release the button. The time can be set at any moment.