Manualshelf

User's Manual

ManualsBrandsDatto ManualsElectronicsWireless 802.11b/g/n Mesh Router
71727374757677787980
11.3 SNMP
S
e
tt
i
n
g
s
Click the SNMP Settings link under the
Management
menu to monitor network-attached
devices using the Simple Network Management Protocol (SNMP). SNMP allows messages
(called “protocol data unit’s) to be sent to various parts of a network. Upon receiving these
messages, SNMP-compatible devices (called agents) return data stored in their Management
Information Bases.
SNMP
Enable/Disable
Enable or disable the OM2P-LC/OM2P-HS SNMP function.
Contact Enter the contact details of the device.
Location Enter the location of the device.
Community
Name Enter the password for accessing the SNMP community for
read-only access.
Community
Name Enter the password for accessing the SNMP community for read
and write
acce
ss
.
Trap
Destination
I
P
A
dd
r
ess
Trap
D
es
t
i
n
a
t
i
o
n
Community
Na
m
e
Enter the IP address where SNMP traps are to be sent.
Enter the password of the SNMP trap community.
Save/Apply
/ Cancel Click
Save/Apply
to apply the changes or Cancel to return
previous settings.
Clicking
Save/Apply
change the setting immediately. You cannot undo the action.