Operation Manual

LED and Beeper Indications
Product Reference Guide 303
LED and Beeper Indications
The reader’s beeper sounds and its LED illuminates to indicate various func-
tions or errors on the reader. An optional “Green Spot” also performs useful
fun
ctions. The tables below list these indications. One exception to the
behaviors listed in the tables is that the reader’s functions are programma-
ble, and may or may not be turned on. For example, certain indications such
as the power-up
beep can be disabled us
ing programming bar code labels.
Table 53.
INDICATION DESCRIPTION LED BEEPER
Power-up
Beep
The reader is in the pro-
cess of powering-up.
Reader beeps four
times
at highest fre-
quency and volume
upon power-up.
Good Read
Beep
A label has been suc-
cessfully scanned by
the r
eader.
LED behavior for
this in
dication is
configurable via
the feature “
Good
Read: When to
Indicate
”
The reader will beep
once at
current fre-
q
uency, volume, tonal
sett
ing and duration
upon a successful label
scan.
Green Spot
a
a. Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
flashes
mome
ntarily
Upon successful read of
a labe
l, the software
turns the green spot on
for the time specified by
the configured value.
N/A N/A
Image Cap-
ture
When ready to capture
image
Blue light flashes 2
times when updat-
in
g
N/A
LED and Beeper Indications
Table 54. Programming Mode Indications
Programming Mode - The following indications ONLY occur when the reader is in Pro-
gramming Mode.
INDICATION DESCRIPTION LED BEEPER
Label Program-
ming Mode Entry
A valid programming
label has been scanned.
LED blinks con-
tinuously
Reader sounds
four low frequency
beeps.
Label Program-
ming Mode Rejec-
tion of Label
A label has been rejected. N/A
Reader sounds
t
h
ree times at low-
est frequency &
current volum
e.
Label Program-
ming Mode Accep-
tance of Partial
Label
In
cases where multiple
labels must be
scanned
to program
one feature,
this indication acknowl-
edges each portion as it is
success
fully scanned.
N/A
Reader sounds one
short beep at high-
est frequency &
current volum
e.