Operation Manual

2D Global Features Enter/Exit Programming Mode

Product Reference Guide

177

Aztec Code Set Length 1

Specifies one of the bar code lengths for Aztec Code Length Control. Length

1 is the minimum label length if in Vari

able Length Mode, or the first fixed

length if in Fixed Length Mode. Characters can be set from 0001 to 3,832

characters in increments of 0001 (pad with zeroes).

See page 267 for detailed instructions on setting this feature.

$CAZL1

Select Aztec Code Length 1 Setting

To configure this feature, scan the ENTER/EXIT

PROGRAMMING MODE bar code above, then the bar

code at left followed by the digits from the Alphanu-

meric characters in

Appendix D, Keypad

repre-

senting your desired character(s). End by scanning

the ENTER

/EXIT bar code again.

Make a mistake? Scan the CANCEL bar code t

abort

and not save the entry string. You can then start

again at the beginning.

CANCEL

DEFAULT

0001 = Length 1 is 1 Character