Operation Manual

Enter/Exit Programming Mode

132

PowerScan™ PD9530/PBT9500/PM9500

Standard 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for Standard 2 of 5 Length

Control. Length 2 is the maximum label length if in Variable Length Mode,

or the second fixed length if in Fixed Length Mode. Length includes the bar

code’s check and da

characters.

The length can be set from 1 to 50 character

s. A setting of 0 specifies to

ignore this length (only one fixed length).

Table 11 provides examples for setting Length 2. See page 268 for detailed

instructions on setting this feature.

Table 11. Standard 2 of 5 Length 2 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zeroes)

00 (Ignore This

Length)

07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CS2L2

Select Standard 2 of 5 Length 2 Setting

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start

again at the beginning.

CANCEL

DEFAULT

50 = Length 2 is 50 Characters