User's Manual

DATALOGIC JOYA™ X2
78
1 4
4 MAINTENANCE
Battery packs are not initially charged. Therefore the initial
operation to perform is to charge them. See below.
NOTE
By default, the battery pack is disconnected at the factory
to avoid damage due to excessive draining.
Annual replacement of rechargeable battery pack avoids
possible risks or abnormalities and ensures maximum
performance.
CAUTION
4.1 CHARGING THE BATTERY PACK
The battery pack autonomy varies according to factors, such as the frequency
of barcode scanning, RF usage, etc.
The battery icon on the Taskbar indicates when the battery pack is low.
It is also possible to recharge the battery pack by using a JOYA Cradle.
Moreover recharging is possible by USB Direct connection with the host
computer, but with longer charging times and in this case it is advised to keep
the mobile computer off.
The battery pack autonomy varies according to many factors,
such as the frequency of barcode scanning, RF usage, battery
life, storage, environmental conditions, etc.
NOTE
The maximum time required to recharge a completely run-
down standard battery pack is about 12 hours by using the
USB and 7 hours by using the cradle.
CAUTION