User Manual

Setup

Gryphon™ I GD44XX/GBT4400/GM440X

Installing the Interface Cable

For Corded versions, connect the reader cable by inserting the cable into the

handle as shown in Figure 1. To remove it, insert a paper clip into the

release aperture, then unplug the cable.

Figure 1. Connect/disconnect the cable

RS-232 Serial

Connection

Turn off power to the terminal/PC and connect the reader to the terminal/PC

serial port via the RS-232 cable as shown in Figure 2. If the terminal will not

support POT (Power Off the Terminal) to supply reader power, use the

approved power

supply (AC Adapter). Plug the AC Adapter barrel connector

into the socket on the RS-232 cable connector and the AC Adapter plug into

a standard power outlet.

Figure 2. RS-232 Connection