User Manual

Enter/Exit Programming Mode1D Code Selection

184

Gryphon™ I GD44XX/GBT4400/GM440X

Code 11 Set Length 1

This feature specifies one of the bar code lengths for Code 11 Length Con-

trol. Length 1 is the minimum label length if in Variable Length Mode, or the

first fixed length if in Fixed Length Mode. Length includes

the bar code’s

check and data characters. The length can be

set from 2 to 50 characters.

Table 13 provides some examples for setting Length 1. See page 283 for

detailed instructions on setting this feature.

Table 13. Code 11 Length 1 Setting Examples

STEP ACTION EXAMPLES

Desired Setting (pad with

leading zeroes)

02 Characters 07 Characters 15 Characters 50 Characters

2 Scan ENTER/EXIT PROGRAMMING MODE

3 Scan SELECT CODE 11 LENGTH 1 SETTING

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’

5 Scan ENTER/EXIT PROGRAMMING MODE

$CC1L1

Select Code 11 Set Length 1 Setting

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start again

at the beginning.

CANCEL

DEFAULT

04 = Length 1 is 4 Characters