user manual

Resetting the Pegaso

24 Pegaso™ Industrial PDA with Windows

Cold Reset

A cold reset is a complete reset of the Pegaso in which all applications are forc-

ibly closed and working RAM is cleared.

Reason to Cold Reset —

Use a cold reset when the Windows CE operating

system locks up and the warm reset command does not work.

Procedure to Cold Reset —

To perform a cold reset, remove the Battery

Pack and use the Stylus to press the

<Reset> button inside the Battery Compart-

ment, shown in

Figure 15. Reinstall the Battery Pack, and press the <Power> but-

ton.

Figure 15. Cold Reset

After Cold Reset

Cold reset clears the working RAM and initializes the file system. You will lose

any applications and data which are not stored in persistent flash memory (refer

to the PRG for more information).

• The splash screen will appear after a short period.

• Recalibrate the touch screen.

• The desktop appears with the application shortcuts on the screen.

• RF Network PC Card (if present) connects to the network system.

CAUTION

Datalogic recommends that you always attempt a warm reset before

initiating a cold reset. Once you initiate a cold reset, all applications

are forcibly closed and working RAM and files are cleared.

Any applications, files, or data in RAM will be lost on cold reset. Only

applications and files in persistent memory are preserved. Refer to

Persistent Memory on page 22 for information on preserving appli-

cations and files with persistent flash storage memory.

Cold Reset Button