! n e d d File E81296 Project 4789850659 March 18, 2021 REPORT On r e th O e g a s U Is i b r o F HOUSEHOLD COOKING APPLIANCES y. l n TSANN KUEN (ZHANGZHOU) ENTERPRISE CO LTD. FUJIAN, CHINA n it o c Copyright © 2021 UL LLC O UL LLC authorizes the above named company to reproduce this Report only for purposes as described in the Conclusion, provided it is reproduced in its entirety.
File E81296 Vol. 1 Sec. 591 and Report Page 1 Issued: Revised: 2021-03-18 2021-08-04 DESCRIPTION ! n e d d PRODUCT COVERED: USL, CNL – Egg Bite Maker, Models TSK-2956P, DBBM900#, where “#” may be any combination of number(s), letter(s), “-”, and/or blank. i b r o F USL, CNL – Waffle Maker, Waffle Bite Maker, Models TSK-2956WB, DDWB900#, where “#” may be any combination of number(s), letter(s), “-”, and/or blank.
File E81296 Vol. 1 Sec. 591 and Report Page 2 Issued: 2021-03-18 CONSTRUCTION DETAILS: ! n e d d Section General – The following construction items are described in the Section General: Mechanical Assembly Soldered Connections Markings Date Code Carton Markings Corrosion Protection Wiring Terminations Instruction Manual Polarization Instructions e g a s U Is i b r o F For details of the construction, refer to the following photographs and descriptive pages.
File E81296 Vol. 1 Sec. 591 and Report Page 3 Issued: 2021-03-18 Wiring Terminations - In addition to Sec. Gen., the alternative means of the internal wiring connected to the terminals of heating elements, provided with crimp connector at the ends, and then spot-welded to the terminals of Thermostat. i b r o F Alternate – Same as above, except provided with one steel terminal spot-welded to each cold pin of heating element.
File E81296 Vol. 1 Sec. 591 and Report Page 4 Issued: Revised: 2021-03-18 2021-08-04 ILLUSTRATIONS: ! n e d d The following illustrations are provided: ILL. No.
File E81296 Vol. 1 Sec. 591 and Report Page 5 Issued: 2021-03-18 EGG BITE MAKER, MODEL TSK-2956P - FIGS. 1 THRU 4 General – Fig. 1 shows the overall view, Fig. 2 shows the bottom view, Fig. 3 shows the open view of model TSK-2956P, Fig. 4 shows the shape of Silicone Cup. The general design, shape and arrangement shall be as illustrated except where variations are specially described. 1. i b r o F 2.
File E81296 Vol. 1 Sec. 591 and Report Page 6 Issued: Revised: 2021-03-18 2021-08-04 EGG BITE MAKER, MODEL TSK-2956P - FIGS. 5 AND 6 General – Fig. 5 shows the interior view with the Upper Enclosure opened, Fig. 6 shows the interior view with Lower Enclosure opened of Model TSK-2956P. 1. i b r o F Upper/Lower Heating Elements – Sheath type. Each rated 120 V, 600 W. Coiled Cr-Al resistance wire embedded in magnesium oxide compound insulation and encased in copper-clad steel sheath, measured 6.
File E81296 Vol. 1 Sec. 591 and Report Page 7 Issued: 2021-03-18 Alternate – Same as above, except for R/C (XCMQ2/8), SHANGHAI XINYUAN ELECTRONICS CO LTD (E362696), Type RY240, (rated 125 V, 15/10 A, function temperature at 240°C). 5. Hinge Assembly – Consists of the following items: a. Hinge sleeving – R/C (UZIQ2)/CNR or R/C (UZFT2)/CNR, rated min. 150°C. Measured overall minimum 110 mm long, wrapped around internal wirings at hinge area. b.
File E81296 Vol. 1 Sec. 591 and Report Page 8 Issued: 2021-03-18 EGG BITE MAKER, MODEL TSK-2956P – FIG. 7 ! n e d d General – Fig. 7 shows the view of the Model TSK-2956P with Terminal Block Cover removed. Terminal Block Compartment – Integrally molded with Lower Enclosure. Measured overall 72.5 by 25.5 by 29.5 mm deep at inside. 2. Terminal Block Cover - R/C (QMFZ2), HYOSUNG CHEMICAL CORP (E163907), Type J801R, rated 94HB, 120°C. Measured overall 85 by 58 by 7.5 mm high, 1.7 mm thick.
File E81296 Vol. 1 Sec. 591 and Report Page 9 Issued: Revised: 2021-03-18 2021-08-04 WAFFLE MAKER, MODEL TSK-2956WB – FIGS. 8 THRU 10 General – Fig. 8 shows at opened position, Figs. 9 and 10 show interior views of Model TSK-2956WB with Upper Enclosure and Lower Enclosure removed. Model TSK-2956WB is identical to Model TSK-2956P, described from Fig. 1 to Fig. 7, except where noted. i b r o F 1. Upper/Lower Platen – Aluminum alloy. mm, 1.3 mm thick. 2. Upper/Lower Heating Elements – Sheath type.
File E81296 Vol. 1 Sec. 591 and Report Page 10 Issued: 2021-03-18 Alternate – Same as above, except for R/C (XCMQ2/8), SHANGHAI XINYUAN ELECTRONICS CO LTD (E362696), Type RY240, (rated 125 V, 15/10 A, function temperature at 240°C). d n u o b e r o Fo t S r In e p s n it o c O y.
File E81296 Vol. 1 Sec. 591 and Report Page 11 Issued: New: 2021-03-18 2021-08-04 DONUT MAKER, MODEL TSK-2956DT – FIGS. 11 THRU 13 General – Fig. 11 shows at opened position, Figs. 12 and 13 show interior views of Model TSK-2956DT with Upper Enclosure and Lower Enclosure removed. Model TSK-2956DT is identical to Model TSK-2956P, described from Fig. 1 to Fig. 7, except where noted. i b r o F 1. Upper/Lower Platen – Aluminum alloy. mm, 1.3 mm thick. 2. Upper/Lower Heating Elements – Sheath type.
File E81296 Vol. 1 Sec. 591 and Report Page 12 Issued: New: 2021-03-18 2021-08-04 Alternate – Same as above, except for R/C (XCMQ2/8), SHANGHAI XINYUAN ELECTRONICS CO LTD (E362696), Type RY240, (rated 125 V, 15/10 A, function temperature at 240°C). d n u o b e r o Fo t S r In e p s n it o c O y.
