fo rb id de n. is e ag us er th O ly . on fe re nc e File E81296 Project 4786926393 n re June 5, 2015 pe c tio REPORT nd in s On eb ou HOUSEHOLD, COOKING APPLIANCES rS to r Tsann Kuen (Zhangzhou) Enterprise Co Ltd Zhangzhou, Fujian, China 11 fo Copyright 2015 UL LLC Ts an nk ue n’ s C on fid en tia lD at a. Pr ov id e d on 20 21 /0 5/ UL LLC authorizes the above named company to reproduce this Report provided it is in its entirety.
Vol. 1 Sec. 503 and Report Page 1 Issued: Revised: 2015-06-05 2021-04-29 fo rb id de n. File E81296 DESCRIPTION e Grill, Models TSK-2186G, UOG# and DMG#. ag USL, CNL - is PRODUCT COVERED: er us Griddle, Models TSK-2186P, UOS# and DMS# and DGMS03*#. fe re nc e on ly .
Vol. 1 Sec. 503 and Report Page 2 Issued: 2015-06-05 fo rb id de n. File E81296 CONSTRUCTION DETAILS: ag us er th Corrosion Protection Instruction Manual Important Safeguards Polarization Instructions O Mechanical Assembly Markings Date Code Carton Markings e is Section General – The following construction items are described in the Section General: e on ly . For details of the construction, refer to the following photographs and descriptive pages.
Vol. 1 Sec. 503 and Report Page 3 Issued: Revised: 2015-06-05 2020-11-13 fo rb id de n. File E81296 us ag e is Cautionary Markings - Each unit is provided with the following or the equivalent on the unit in a readily visible location with a minimum letter height of 2.4 mm: “HOUSEHOLD USE ONLY.” Also marked with “DO NOT IMMERSE IN WATER” on the unit, the letter should be clear and legible under conditions of intended use of the appliance.
Thermostat and ag e is Thermostat and Thermostat and Thermostat and on e nc re fe re n tio pe c in s nd eb ou to r rS fo 11 5/ 20 21 /0 on d ov id e Pr a. at on fid en tia lD C s Ts an nk ue n’ 2015-06-05 2021-04-29 fo rb id de n. Description Location of Temperature Regulating Cutoff of model TSK-2186WM Location of Temperature Regulating Cutoff of model TSK-2186PR Location of Temperature Regulating Cutoff of model TSK-2186SP Location of Temperature Regulating Cutoff of model TSK-2186DR ly .
Vol. 1 Sec. 503 and Report Page 3A Issued: Revised: 2015-06-05 2021-04-29 fo rb id de n. File E81296 MODEL DIFFERENCES: e is Models UOG# and DMG# are identical to Model TSK-2186G, except for model designation. er us ag Models UOS#, DMS# and DGMS03*# are identical to Model TSK-2186P, except for model designation. ly . O th Models UOW# and DMW# are identical to Model TSK-2186W, except for model designation.
Vol. 1 Sec. 503 and Report Page 4 Issued: Revised: 2015-06-05 2020-06-12 GRILL, MODEL TSK-2186G – FIGS. 1 THRU 3 us ag e is General – Figs. 1 and 2 show overall views and bottom view, Fig. 3 shows the model at opened position of Model TSK-2186G. The general design, shape and arrangement shall be as illustrated except where variations are specially described. fo rb id de n. File E81296 Power Supply Cord – Non-detachable. Listed, Type HPN, No. 18/2 AWG, rated minimum 105C, 10 A, 125 V.
Vol. 1 Sec. 503 and Report Page 5 Issued: Revised: 2015-06-05 2020-06-12 fo rb id de n. File E81296 GRILL, MODEL TSK-2186G – FIGS. 4 AND 5 e is General – Figs. 4 and 5 show interior views of Model TSK-2186G with Top Enclosure and Bottom Enclosure removed, respectively. Heat Insulation Sheet – Optional. Mica. Measured 88 by 88 mm, 0.5 mm thick. Secured to Upper Platen by screw. 2. Pilot Lights – Not shown. Neon lamp. Connected in series with resistor.
Vol. 1 Sec. 503 and Report Page 6 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 Alternate - R/C (XAPX2/8), SHAOXING ZHONGXIN ELECTRIC APPLIANCES CO LTD (E243487), Type KSD301C, rated 125 V ac, 16 A. Thermal Cutoff - R/C (XCMQ2/8), THERM-O-DISC INC, SUB OF EMERSON ELECTRIC CO (E40667), Type G4A00240C or G4A01240C, rated 120 V ac, 15 A, functioning temperature at 240C. One end spot-welded to terminal of Thermostat, the other spot-welded to the cold pin of Lower Heating Element.
Vol. 1 Sec. 503 and Report Page 7 Issued: Revised: 2015-06-05 2018-05-08 GRILL, MODEL TSK-2186G – FIGS. 6 and 6A ag e is * General – Figs. 6 and 6A show internal view of Terminal Block Compartment of Model TSK-2186G, as well as the inside of the Terminal Block Cover. fo rb id de n. File E81296 Terminal Block Compartment – Integrally molded with Bottom Enclosure. Measured overall 51 by 34 by 15 mm deep. Provided with one 11 by 9.8 mm U-Shape cutout for passage of Power Supply Cord. See ILL.
Vol. 1 Sec. 503 and Report Page 8 Issued: Revised: 2015-06-05 2017-11-30 fo rb id de n. File E81296 GRIDDLE, MODEL TSK-2186P – FIGS. 7 THRU 9 er Upper and Lower Platen – Flat shape. Aluminum alloy. Each measured overall 134 by 120 by 23.5 mm, 1 mm thick. Secured together with integral posts to create a rotating hinge connection, and respectively secured to Top and Bottom Enclosure by screw. Ts an nk ue n’ s C on fid en tia lD at a.
Vol. 1 Sec. 503 and Report Page 9 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 us ag e General – Fig. 10 shows at opened position, Figs. 11 and 12 show interior views of Model TSK-2186W with Top Enclosure and Bottom Enclosure removed. Model TSK-2186W is identical to Model TSK-2186G, described from Fig. 1 to Fig. 6, except where noted. is WAFFLE MAKER, MODEL TSK-2186W – FIGS. 10 THRU 12 Upper and Lower Platen – Waffle shape. Aluminum alloy.
Vol. 1 Sec. 503 and Report Page 10 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 * us ag e General – Fig. 13 shows at opened position, Figs. 14 and 15 show interior views of Model TSK-2186W2 with Top Enclosure and Bottom Enclosure removed. Model TSK-2186W2 is identical to Model TSK-2186G, described from Fig. 1 to Fig. 6, except where noted. is WAFFLE MAKER, MODEL TSK-2186W2 – FIGS. 13 THRU 15 Upper Platen – Waffle shape, same as Model TSK-2186W. Aluminum alloy.
Sec. 503 and Report Page 10A Issued: New: 2015-06-05 2021-01-13 Heat Insulation Sheet – Not provided. Ts an nk ue n’ s C on fid en tia lD at a. Pr ov id e d on 20 21 /0 5/ 11 fo rS to r eb ou nd in s pe c tio n re fe re nc e on ly . O th er us ag e is 5. Vol. 1 fo rb id de n.
Vol. 1 Sec. 503 and Report Page 11 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 us ag e General – Fig. 16 shows at opened position, Figs. 17 and 18 show interior views of Model TSK-2186H with Top Enclosure and Bottom Enclosure removed. Model TSK-2186H is identical to Model TSK-2186G, described from Fig. 1 to Fig. 6, except where noted. is WAFFLE MAKER, MODEL TSK-2186H – FIGS. 16 THRU 18 Upper and Lower Platen – Aluminum alloy.
Vol. 1 Sec. 503 and Report Page 12 Issued: Revised: 2015-06-05 2021-01-13 WAFFLE MAKER, MODEL TSK-2186F – FIGS. 18A and 18B us ag e is General – Fig. 18A shows at opened position, Fig. 18B shows interior view of Model TSK-2186F with Bottom Enclosure removed. Model TSK-2186F is identical to Model TSK-2186G, described from Fig. 1 to Fig. 6, except where noted. fo rb id de n. File E81296 Upper Platen – Waffle shape, same as Model TSK-2186W. Aluminum alloy. Measured overall 134 by 120 by 23.
Sec. 503 and Report Page 12A Issued: New: 2015-06-05 2021-01-13 Heat Insulation Sheet – Not provided. Ts an nk ue n’ s C on fid en tia lD at a. Pr ov id e d on 20 21 /0 5/ 11 fo rS to r eb ou nd in s pe c tio n re fe re nc e on ly . O th er us ag e is 5. Vol. 1 fo rb id de n.
Vol. 1 Sec. 503 and Report Page 13 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186WP - FIGS. 19 AND 20 us ag e is General – Fig. 19 shows at opened position, Fig. 20 shows interior view of Model TSK-2186WP with Bottom Enclosure removed. Model TSK-2186WP is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 24.7 mm, 1 mm thick.
Vol. 1 Sec. 503 and Report Page 14 Issued: New: 2015-06-05 2019-11-12 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186WH - FIGS. 21 AND 22 us ag e is General – Fig. 21 shows at opened position, Fig. 22 shows interior view of Model TSK-2186WH with Bottom Enclosure removed. Model TSK-2186WH is identical to Model TSK-2186F, described from Fig. 1 to Fig. 6, and Fig. 18A to Fig. 18B, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 23.5 mm, 1 mm thick.
Vol. 1 Sec. 503 and Report Page 15 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186WE - FIGS. 23 AND 24 us ag e is General – Fig. 23 shows at opened position, Fig. 24 shows interior view of Model TSK-2186WE with Bottom Enclosure removed. Model TSK-2186WE is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 23.5 mm, 1 mm thick.
Vol. 1 Sec. 503 and Report Page 16 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186WA - FIGS. 25 AND 26 us ag e is General – Fig. 25 shows at opened position, Fig. 26 shows interior view of Model TSK-2186WA with Bottom Enclosure removed. Model TSK-2186WA is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 20.5 mm, 1 mm thick.
Vol. 1 Sec. 503 and Report Page 17 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 us ag e General – Fig. 27 shows at opened position, Figs. 28 and 29 show interior views of Model TSK-2186P2 with Top Enclosure and Bottom Enclosure removed. Model TSK-2186P2 is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. is PIZZELLE MAKER, MODEL TSK-2186P2 - FIGS. 27 THRU 29 Upper Platen – Aluminum alloy.
Vol. 1 Sec. 503 and Report Page 18 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186PC - FIGS. 30 AND 31 us ag e is General – Fig. 30 shows at opened position, Fig. 31 shows interior view of Model TSK-2186PC with Bottom Enclosure removed. Model TSK-2186PC is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 23.5 mm, 1.1 mm thick.
Vol. 1 Sec. 503 and Report Page 19 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 us ag e General – Fig. 32 shows at opened position, Figs. 33 and 34 show interior views of Model TSK-2186WB with Top Enclosure and Bottom Enclosure removed. Model TSK-2186WB is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. is WAFFLE MAKER, MODEL TSK-2186WB - FIGS. 32 THRU 34 Upper and Lower Platen – Aluminum alloy.
Vol. 1 Sec. 503 and Report Page 20 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 us ag e General – Fig. 35 shows at opened position, Figs. 36 and 37 show interior views of Model TSK-2186WS with Top Enclosure and Bottom Enclosure removed. Model TSK-2186WS is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. is WAFFLE MAKER, MODEL TSK-2186WS - FIGS. 35 THRU 37 Upper and Lower Platen – Aluminum alloy.
Vol. 1 Sec. 503 and Report Page 21 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186WM - FIGS. 38 AND 39 us ag e is General – Fig. 38 shows at opened position, Fig. 39 shows interior view of Model TSK-2186WM with Bottom Enclosure removed. Model TSK-2186WM is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 23 mm, 1 mm thick.
Vol. 1 Sec. 503 and Report Page 22 Issued: Revised: 2015-06-05 2021-01-13 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186PR - FIGS. 40 AND 41 us ag e is General – Fig. 40 shows at opened position, Fig. 41 shows interior view of Model TSK-2186PR with Bottom Enclosure removed. Model TSK-2186PR is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 24 mm, 1.2 mm thick.
Vol. 1 Sec. 503 and Report Page 23 Issued: New: 2015-06-05 2021-04-29 fo rb id de n. File E81296 us ag e General – Fig. 42 shows at opened position, Figs. 43 and 44 show interior view of Model TSK-2186SP with Top and Bottom Enclosure removed, respectively. Model TSK-2186SP is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. is WAFFLE MAKER, MODEL TSK-2186SP - FIGS. 42 THRU 44 Upper and Lower Platen – Aluminum alloy.
Vol. 1 Sec. 503 and Report Page 24 Issued: New: 2015-06-05 2021-04-29 fo rb id de n. File E81296 WAFFLE MAKER, MODEL TSK-2186DR - FIGS. 45 AND 46 us ag e is General – Fig. 45 shows at opened position, Fig. 46 shows interior view of Model TSK-2186DR with Bottom Enclosure removed. Model TSK-2186DR is identical to Model TSK-2186W, described from Fig. 1 to Fig. 6, and Fig. 10 to Fig. 12, except where noted. Lower Platen – Aluminum alloy. Each measured overall 134 by 120 by 23.5 mm, 1.2 mm thick.
