Assembly Instructions

(A) POSTS (2)
(B) LEGS (4)
(C) LARGE END CAPS (4)
(D) ARMS (4)
(E) SQUARE CROSS BRACES (2)
(F) ROUND CROSS BRACES (2)
(G) MACHINE SCREWS (4)
(H) WOOD PLUGS (4)
(I) SMALL END CAPS (4)
(J) HANGER BOLTS (4)
Tools required: Screwdriver (not included)
IMPORTANT NOTE: Follow instructions listed below in the proper sequence as numbered to assure fast, easy and correct assembly.
1. Note: Upon opening, thoroughly clean all wood surfaces with furniture polish to remove dust and dirt that may have settled
onto finish during shipment.
2. Slide Legs (B) into grooves on one end of Posts (A). Tighten Large End
Caps (C) into bottom edge of Legs (B) to secure Legs (B) to Posts (A).
3. Slide Arms (D) into grooves on opposite end of Posts (A). Tighten
Large End Caps (C) into top edge of Arms (D) to secure Arms (D) in
place. Be sure that large holes on Arms (D) are facing inward toward
each other.
4. Align Square Cross Braces (E) with slots in Posts (A). Insert Hanger Bolts
(J) into large holes near ends of Square Cross Braces (E) with threads
pointing outward. If necessary, rotate Hanger Bolts (J) so that threads
will align with Machine Screws (G). Insert Machine Screws (G) through
Posts (A), Legs (B), and tighten into Hanger Bolts (J).
5. Align Round Cross Braces (F) with large holes on ends of Arms (D).
Insert threads of Small End Caps (I) through small hole in Arms (D) and
tighten into ends of Round Cross Braces (F). Be sure that large holes
on Arms (D) are facing toward each other.
6. Insert Wood Plugs (H) into screw holes on Posts (A).
7. Your furniture has been handcrafted and skillfully finished by fine
craftsmen. Rich, deep antique finishes have been applied which
require very little polish. However, should you desire a shinier finish,
simply use any good grade of furniture polish, rubbing the finish lightly
as it is being applied. Allow to dry and buff lightly with a soft cloth.
Made in China
PARTS
ASSEMBLY INSTRUCTIONS (LX)
"HEIRLOOM CHERRY"
"NOSTALGIC OAK"
ATTENTION: SOME NUMBERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEY MAY ALREADY BE ASSEMBLED. CAREFULLY CHECK PARTS
AND PACKING MATERIALS PRIOR TO ORDERING REPLACEMENTS.
Thank you for purchasing this quality product. Be sure to check
all packing material carefully for small parts which may have
come loose inside the carton during shipment. Separate, identify,
and count all parts and metal hardware. Compare with parts list
to be sure all parts are present. If any part(s) are missing or
damaged, phone, fax, or mail to our Customer Service
Department. For efficient and speedy service, please indicate the
model number and code letter of part(s) needed.
HARDWARE ILLUSTRATION
G H J
"HEIRLOOM CHERRY"
"NOSTALGIC OAK"
Made in China
Place of Purchase
Daytime Phone
( )
Address
Name
Reason for Replacement
Part Letter Description Quantity
IF YOU HAVE A PROBLEM, WE WANT TO HAVE THE OPPORTUNITY TO MAKE IT RIGHT!