R OWNER’S MANUAL GUIDE D’UTILISATION Model • Modèle DBD5L CAUTION: Read and follow all safety rules and operating instructions before first use of this product. PRÉCAUTION : Veuillez lire attentivement les consignes de sécurité et les instructions d'utilisation avant l'utilisation initiale de ce produit. R Beverage Dispenser Owner’s Manual Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . 3 R Distributeur de Breuvage Guide d'utilisation Table des matières . . . . . . . . . . . . .
WELCOME Welcome to the Danby family. We’re proud of our quality products and we believe in dependable service. easy-to-use manual and you’ll hear it in the friendly voices of our consumer service department. Tel: 1-800-26(1-800-263-2629) R experience these values each time you use your Beverage Dispenser. That’s important, because your new Beverage Dispenser will be part of your family for a long time.
TABLE OF CONTENTS Important Safety Information 4 4 5 5 Grounding Instructions Handling Beer Kegs Safety Precautions Important Notice Features 6 7 Product Features & Accessories Parts & Accessories Setting Up Your Beverage Dispenser How the Beverage Dispenser Works Disposal of Packaging Location Installation Instructions 8 8 9 9 6 8 10 Connecting the Beverage Dispenser Preparing a Standard 5 Liter Mini Keg Getting the Dispenser Ready Turning on the Air Pressure Preparing the Beverage Container Conn
IMPORTANT SAFETY INFORMATION READ ALL SAFETY INFORMATION BEFORE USING GROUNDING INSTRUCTIONS FOR YOUR SAFETY... Pertaining to the risk of Fire, Electric Shock or Injury to Persons. • This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. • This appliance is equipped with a power cord having an equipment grounding conductor and grounding plug.
IMPORTANT SAFETY INFORMATION SAFETY PRECAUTIONS • This appliance must be connected to a properly grounded electrical outlet (see “Grounding Instructions” on page 4) • Do not operate this appliance if it • Do not defrost this appliance using other electric appliances (i.e. hair dryer) and never attempt to scrape or remove ice/frost with sharp objects. • Always disconnect the appliance from the power supply before cleaning and/or attempting repairs/servicing. has a damaged power cord or plug.
PRODUCT FEATURES AND ACCESSORIES 4 3 7 2 5 6 1 1. DRIP TRAY 6. ON /OFF SWITCH 2. TAP 7. TEMPERATURE CONTROL 3. TAP HANDLE 8. POWER SUPPLY CORD 4. HANDLE TO OPEN DISPENSER LID 5.
PARTS AND ACCESSORIES INCLUDED ACCESSORIES Remove and inspect that all accessories supplied with this unit are present and in good condition. In the event any of the accessories are missing and/or not in good condition, please call Danby TOLL FREE at the number listed below to speak with one of our Customer Service Representatives. 2 7 6 5 3 9 O PEN 8 4 12 11 1 10 1. 1 YELLOW RISING TUBE 2. 2 AIR CONNECT TUBES 3. 3 DISPENSING TUBES with Black Stoppers 4.
SETTING UP YOUR BEVERAGE DISPENSER IMPORTANT • Ensure that all included accessories are present and in good condition (see ‘Parts & Accessories” on page 7). • Make sure you have read and understood all important safety information on pages 4-5. How the Beverage Dispenser Works. This appliance is a beverage cooler and dispenser. Standard 5 liter mini kegs, and the Beverage Container are cooled to the desired temperature in the cooling compartment of the appliance.
SETTING UP YOUR BEVERAGE DISPENSER LOCATION OF THE BEVERAGE DISPENSER Find a suitable area for the dispenser. Do not place the dispenser outside, in direct sunlight, or in any other location where the dispenser will be exposed to water or other harsh conditions. The dispenser should not be placed in environments where the ambient temperature drops below 65°F (18°C) or goes above 85°F (29°C). The ideal ambient temperature is 72° (22°C).
CONNECTING THE BEVERAGE DISPENSER Preparing A Standard 5 Liter Mini Keg USING THE YELLOW ADAPTOR To connect the Yellow Adapter to a standard 5 liter mini keg, follow these instructions. NOTE: MAKE SURE ALL COMPONENTS ARE PROPERLY SANITIZED PRIOR TO EACH USE. PREPARING THE STANDARD 5 LITER MINI KEG FASTEN RISING PIPE INTO WHITE ADAPTER (turn in clockwise Direction) 1. Screw the YELLOW RISING PIPE into the YELLOW ADAPTER. Make sure there is an o-ring inside the RISING PIPE. (See Figure 2) 2.
CONNECTING THE BEVERAGE DISPENSER Preparing A Standard 5 Liter Mini Keg (cont’d) USING THE YELLOW ADAPTER (continued) DISPENSING TUBE FOR YELLOW ADAPTER The DISPENSING TUBE will be pre-assembled, but if assembling is required please follow these instructions: DISPENSING TUBE WITH BLACK STOPPER YELLOW MALE CONNECTOR METAL CLIP YELLOW MALE CONNECTOR 8. Place the CLIP over the end of the DISPENSING TUBE DISPENSING TUBE 9. Insert the YELLOW MALE CONNECTOR into the opening of the end with the CLIP.
CONNECTING THE BEVERAGE DISPENSER Preparing A Standard 5 Liter Mini Keg (cont’d) USING THE YELLOW ADAPTER (continued) CONNECTING THE MINI KEG TO THE DISPENSER 13. Insert the 5 liter mini keg (with the ADAPTER connected) into the dispenser. Insert the YELLOW MALE CONNECTOR attached to the AIR-CONNECT TUBE into the AIR IN opening of the YELLOW ADAPTER (See Figure 6). Make sure you hear a “locking click” 14.
CONNECTING THE BEVERAGE DISPENSER Preparing the Beverage Container USING THE WHITE BEVERAGE CONTAINER ADAPTER To connect the WHITE ADAPTER to the 5L Beverage Container, follow these instructions. NOTE: MAKE SURE ALL COMPONENTS ARE PROPERLY SANITIZED PRIOR TO EACH USE.
CONNECTING THE BEVERAGE DISPENSER Preparing The Container USING THE WHITE ADAPTER (continued) CONNECTING THE CONTAINER TO THE BEVERAGE DISPENSER 6. Insert the container into the center of the unit. 7. Attach the AIR-CONNECT TUBE to the “AIR IN” valve in the WHITE ADAPTER (See Figure 15). DRINK OUT AIR IN BEVERAGE OUT 8. Attach the DISPENSING TUBE to the “DRINK OUT” valve in the WHITE ADAPTER (See Figure 15). 9. Make sure there are no kinks in the TUBES.
OPERATING THE BEVERAGE DISPENSER Switching On The Power CAUTION: Switch on the beverage dispenser only when the mini keg or the container is properly connected (See “ Connecting the Beverage Disenser ” on pages 10-14). Make sure to clean up any liquids that have spilled in and around the beverage dispenser. 1. Make sure the beverage dispenser is properly connected to a mini keg or to the container. 2. Close the lid. 3.
OPERATING THE BEVERAGE DISPENSER Using The Dispensing Tap You can begin dispensing your beverage immediately after the 5 liter mini keg or the container has been connected to the dispenser. However, it is recommended that you wait until the beverage has reached the desired set temperature. Beer, in particular, can foam excessively if the temperature is too high. NOTE: Do not place glasses on top of the dispenser. It is an uneven surface, so glasses may fall. 1.
OPERATING THE BEVERAGE DISPENSER Depressurize To Disconnect the Mini Keg & the Container It is very important to depressurize the mini keg or container when you are finished using them. If the pressure is not released, remaining high pressure could lead to spraying or spilling. Follow these directions to ensure proper depressurization. NOTE: 5 liter mini kegs are empty when only foam is being dispensed from the beverage dispenser. If necessary you can also disconnect partially full mini kegs. 1.
CARE AND CLEANING CAUTION: DO NOT USE A DISHWASHER TO CLEAN THE BEVERAGE DISPENSER, SPARE PARTS OR ACCESORIES. NOTE: Handling beverages requires very special attention to cleanliness and hygiene. Clean the beverage dispenser, spare parts, and accesories thoroughly after each use. CLEANING THE OUTSIDE OF THE BEVERAGE DISPENSER Always unplug the beverage dispenser before cleaning. Do not use a hard brush or sponge. Use a small amount of soap in water with a soft cloth. To dry, use a dry soft cloth or towel.
CARE AND CLEANING DEFROSTING THE BEVERAGE DISPENSER If frost builds up in and around the beverage dispenser, that means there is too much humidity near the unit. Move the unit to a less humid location. NOTE: DO NOT USE A HEATER OR ANY SHARP UTENSILS TO REMOVE FROST OR CLEAN THE BEVERAGE DISPENSER Unplug the beverage dispenser and, once the frost melts, carefully wipe down the outside or inside of the unit. When dry, plug the unit back in.
BEFORE YOU CALL FOR SERVICE TROUBLE SHOOTING Problem 1)The beverage dispenser is not cooling PossibleCauses WhatTo Do 1) No power supply 1) Make sure the dispenser is plugged into a 3 prong outlet 1a) Make sure the dispenser is plugged into a proper 120V outlet 1b) Change fuse. It is recommended that a qualified electrician change the fuse on the dispenser 1a) Low voltage 1b) Blown fuse 2) Beer or beverage is not being dispensed 2) The mini keg or container is empty.
R LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer. This warranty is available only to the person to whom the unit was originally sold by Danby or by an authorized distributor of Danby, and is non-transferable. TERMS OF WARRANTY Plastic parts (ie.
R Beverage Dispenser The model number can be found on the serial plate located on the back panel of the unit. All repair parts available for purchase or special order when you visit your nearest service depot. To request service and/or the location of the service depot nearest you, call the TOLL FREE NUMBER.
