Specification Sheet

SIZES
Thickness
Sq. Ft.
per Carton
Pieces per
Carton
24 x 24
Field Tile
(23-7/16" x 23-7/16")
(59.44 cm x 59.44 cm)
3/8" 15.28 4
12 x 24
Field Tile
(11-5/8" x 23-7/16")
(29.56 cm x 59.44 cm)
3/8" 15.28 8
12 x 12
Field Tile
(11-1/2" x 11-1/2")
(29.56 cm x 29.56 cm)
3/8" 10.23 11
2 x 2 Mosaic
(Mesh-
mounted on
12" x 12" Sheet)
(11-1/2" x 11-1/2" Sheet)
(29.56 cm x 29.56 cm Sheet)
3/8" 11.40 12
INSTALLATION
Grout Joint Recommendation Shade Variation
1/8" (3/16" when multiple sizes are installed
in a modular pattern and/or when tile
with a length 15" or greater is installed in
a staggered brick-joint pattern. Overlap
should not exceed 33%)
Medium (V2)
TEST RESULTS
ASTM# Result
Water Absorption C373 < 0.5%
Breaking Strength C648 > 450 lbs.
Scratch Hardness MOHS 8.0
Chemical Resistance C650 Resistant
NOTES
Special consideration needs to be given when installing tiles greater
than 15 inches. Please refer to daltile.com/LargeTiles for more
information.
Special care should be taken when grouting with dark pigmented
colors. A grout release is recommended to prevent finely powdered
pigments from lodging in the pores of the surface. Use of a latex
modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, tile and
trim supplied for your particular installation may not match these
samples. Final color selection should be made from actual tiles and
trim and not from tile samples or color reproductions. Manufactured
in accordance with ANSI A137.1 standards.
Water, oil, grease, etc. create slippery conditions. Floor applications
with exposure to these conditions require extra caution in product
selection. Not for use on ramps.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors
FLOOR APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior N/A
Wet & Level – Interior ≥ 0.42
Exterior Applications;
Pool Decking & Other Wet Areas
with Minimal Footwear
≥ 0.60
Ramps & Inclines ≥ 0.65
A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For
more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.
OTHER APPLICATIONS
Suitable
Walls/Backsplashes
Countertops
Pool Linings *
APPLICATION NOTES:
* Mosaic only
Suitable for exterior applications in freezing and non-freezing climates when proper
installation methods are followed.
TRIM
Type Number Size
Pieces per
Carton
Bullnose S-43C9 3 x 12 30
Cove Base** P-36C9T 6 x 12 22
Cove Base**
Outcorner
PC-36C9T 1 x 6 15
Bullnose, cove base and cove base corner trim are intended
to coordinate with floor field tile in the standard 90-degree
installation position.
** Cove base and cove base outcorner trim are clay body ceramic
suitable for exterior applications in non-freezing climates only.
FLOOR
KIMONA SILK
™
COLORBODY
™
PORCELAIN
7834 C. F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com. ©2016 Dal-Tile Corporation (7/16)
SCAN QR CODE
FOR PRODUCT
INFORMATION
Get a QR Code
reader at:
GET.DALTILE.COM
Generated by BeQRious.com