User Manual

1. Power cord (check correct voltage)
2. Power, ON/OFF switch
3. Power indicator
4. AUTO SHUT OFF, switches automaticly OFF after 15 min.
5. SPEAKER LEVEL, connectors
6. LINE LEVEL, connectors
7. VOLUME, control
8. PHASE, 0° and 180° switch
9. CROSSOVER FREQUENCY, adjustment control
10. Heatsink, do not cover!
8
Design Principle
Bass Driver
Amplifier Power
Inputs
Outputs
Controls
Frequency Response
Maximum SPL
Power Consumtion
Finish
Dimensions HxWxD
Weight
Active (Build-in integrated amplifier and crossover.)
Sealed enclosure.
12, 6 ohm, air-dried pulp cone, dual magnets,
video shielding
120 Watt RMS. Build-in subsonic filter. Protected
against minor, brief overload situations..
Fully balanced stereo speaker level.
Input impedance 1.0 kohm.
Stereo line level RCA phono.
Input impedance 15 kohm.
Automatic summation of all inputs.
Fully balanced stereo speaker, 1st order crossover
Stereo line level,
2nd order, 150 Hz highpass crossover.
Output impedance 200 ohms.
DALI SWA 8 DALI SWA 12
15.6 kg / 34.4 lbs
35.2 x 29.1 x 35 cm
Volume level, Lowpass crossover (50-150 Hz),
Polarity (0° eller 180°)
230 VAC 50-60 Hz, max. 260 Watt
120 VAC 50-60 Hz, max. 260 Watt
Black Ask.
19.7 kg / 43.4 lbs
45.5 x 36.5 x 41 cm
Black Ask.
230 VAC 50-60 Hz, max. 260 Watt
120 VAC 50-60 Hz, max. 260 Watt
Volume level, Lowpass crossover (50-150 Hz),
Polarity (0° eller 180°)
Fully balanced stereo speaker, 1st order crossover
Stereo line level,
2nd order, 150 Hz highpass crossover.
Output impedance 200 ohms.
Fully balanced stereo speaker level.
Input impedance 1.0 kohm.
Stereo line level RCA phono.
Input impedance 15 kohm.
Automatic summation of all inputs.
120 Watt RMS. Build-in subsonic filter. Protected
against minor, brief overload situations..
8, 4 ohm, air-dried pulp cone, dual magnets,
video shielding
Active (Build-in integrated amplifier and crossover.)
Sealed enclosure.
Model:
27-150 Hz (variable crossover)
112 dB
30-150 Hz (variable crossover)
107 dB