User Manual

ManualsBrandsDake ManualsDrill PressesFloor Model Drill Press - 1-1/4" Drill Capacity - Frequency Drive - 120V - Var. Speed

1

2

3

4

5

6

7

8

9

9

TURN POWER OFF!

Wait until machine has come to a

complete stop before proceeding with

speed change!

Speed adjustment:

Open the pulley cover to expose the

pulleys and drive belts.

Loosen the belt tension lock handles.

Choose the proper speed for the drilling

operation. Move the belt to the correct

step of the pulleys for the desired speed.

(See diagram on page 8) Push the motor

backwards until proper belt tension is

applied. (1/2” deflection as shown below

speed selection chart in this manual)

Retighten belt tension lock handle.

NOTE: If center pulley bracket does not

move freely, loosen spring loaded bolts

½ - ¾ turns.

BELT TENSION ADJUSTMENT

Proper belt tension is approx. 10 lbs. of pressure or deflection of about 1/2 “