24-INCH DISHWASHER Installation Instructions

3
Important Safety Instructions
CAUTION
Keep the factory installed high loop drain hose in
place to ensure proper dishwasher operation. Do not
cut, tie, strap or lower it. If it is necessary to lengthen
it, install an aftermarket drain extension kit, available
at most home improvement stores.
Design Specifications
Product Specifications
20" (50.8 cm)*
Door in Lowered Position
Adjustable Toe Kick
23 3/4" (60.3 cm)
47” (119.4 cm)
ED24:
29 5/8" (75.2 cm)
ID24:
26 7/8" (68.3 cm)
33 3/4"
(85.7 cm)
to
36 1/4"
(92.1 cm)
1 5/8” (4.1 cm)
Tolerances: +1/16”, -0, (+1.6 mm, -0)
unless otherwise stated
23 7/8” (60.6 cm)
Water Pressure 20 to 120 psi (138 - 827 kPa)
Water
Temperature
120°F, minimum
Power
Requirements
15 A, 120 Vac, 60 Hz dedicated, grounded, circuit.
See the model number label on product for total
connected loaded.
Door style varies with model number.
See use and care manuals for
description.
*Allows for hose on back of unit
Technical
Dimensions