Datasheet

SUGGESTED SPECIFICATIONS: projection screen(s),
(H) x (W). The Tensioned Advantage® Deluxe screen shall
have two motors, one to operate door and one to operate screen. Door motor electrically
operated 120 volt (60 Hz) not more than 1.2 amp. Shall have motor mounted inside the
roller, to be three wire with ground, quick reversal type, oiled for life, with automatic
thermal overload cutout, integral gears, capacitor and an electric brake to prevent
coasting. To have pre-set but adjustable limit switches to automatically stop fabric door in
the ”down“ position. The door will lift to the closed position where a micro switch shall cut
of the electrical current to the door motor. The roller to be of rigid aluminum. Screen
motor is electrically operated 120 volt (60 Hz) not more than 2.4 amp. Shall have motor
mounted inside the roller, to be three wire with ground quick reversal type, oiled for life,
with automatic thermal overload cutout, integral gears, capacitor and an electric brake to
prevent coasting. To have pre-set but adjustable limit switches to automatically stop
picture surface in the ”up“ and ”down“ positions. The roller to be of rigid metal. Screen
fabric to be seamless, lame retardant and mildew resistant vinyl, with black masking
borders standard. Each side of the fabric to have tab guide cable system to maintain even
lateral tension and hold surface lat. Custom slat bar with added weight maintains vertical
tension on the screen surface. The ends of the slat to be protected by heavy duty plastic
caps enclosing a preset adjustable mechanism for screen tensioning. Case shall be a
white powder coated extruded aluminum. Bottom of case to be self-trimming with a built-
in lange around the bottom of the case. A section of the bottom of the case shall be an
aluminum door equipped with hinges so that it opens and closes automatically with the
lowering and raising of the picture surface. The balance of the bottom of the case shall be
a second hinged aluminum door with manual opening to provide access. Hinges shall be
mounted in a concealed way. Junction box shall be internally integrated into the housing
making it possible to install the housing and wire to the building’s electrical system during
construction. The junction box shall contain a quick connect connector that is mounted
in the housing for easy plug-in connection to the motorized fabric and roller assembly.
The motorized fabric and roller assembly to be installed in the case at the factory or at a
later time at the job site. To be complete with integrated low voltage control unit and three
position control switch and cover plate. Suitable for use in environmental air space in
accordance with section 30022 (c) of the National Electric Code, and sections 2128,
12010 (3) and 12100 of the Canadian Electrical Code, part 1, CSA C22.1. Screen to be listed
by Underwriters’ Laboratories.
SPECIFICATION DATA
Video (NTSC 4:3) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
43" x 57" 109 x 145 72" 183 79¼" 201 102 46.3
50" x 67" 127 x 170 84" 213 90¼" 229 114 51.7
60" x 80" 152 x 203 100" 254 104¼" 265 125 56.7
69" x 92" 175 x 234 120" 305 118¼" 300 148 67.1
87" x 116" 221 x 295 150" 381 145¼" 369 170 77.1
108" x 144" 274 x 366 180" 457 170¼" 432 189 85.7
120" x 160" 305 x 406 200" 508 187¼" 476 203 92.1
HDTV (16:9) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
45" x 80" 114 x 203 92" 234 102¾" 261 125 56.7
52" x 92" 132 x 234 106" 269 115¼" 293 140 63.5
54" x 96" 137 x 244 110" 279 119¾" 304 145 65.8
58" x 104" 147 x 264 119" 302 128¼" 326 150 68
65" x 116" 165 x 295 133" 338 141¼" 359 163 73.9
78" x 139" 198 x 353 159" 404 166¼" 422 188 85.3
90" x 160" 229 x 406 184" 467 184¼" 405 203 92.3
Wide (16:10) Format Dimensions
Viewing Area (H x W) Nominal Diagonal Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm In. Cm Lbs. Kg
50" x 80" 127 x 203 94" 239 103¼" 262 125 56.7
57½" x 92" 146 x 234 109" 277 116¼" 295 148 67.1
60" x 96" 152 x 244 113" 287 120¾" 307 145 65.8
65" x 104" 165 x 264 123" 312 129¼" 328 150 68
69" x 110" 175 x 279 130" 330 134¾" 342 157 71.2
72½" x 116" 184 x 295 137" 348 142¼" 361 170 77.1
87" x 139" 221 x 353 164" 417 163¼" 415 188 85.3
100" x 160" 254 x 406 189" 480 185¼" 471 203 92.1
Square Format Dimensions
Viewing Area (H x W) Overall Length of Case* Approx. Ship. Wt.
In. Cm In. Cm Lbs. Kg
50" x 50" 127 x 127 73¼" 186 93 42.2
60" x 60" 152 x 152 84¼" 214 104 47.2
70" x 70" 178 x 178 95¾" 243 116 52.6
84" x 84" 213 x 213 112¼" 288 125 56.7
6' x 8' 183 x 244 122¼" 311 140 63.5
8' x 8' 244 x 244 125¾" 319 148 67.1
7' x 9' 213 x 274 136¼" 346 155 70.3
9' x 9' 274 x 274 134¾" 342 159 72.1
8' x 10' 244 x 305 149¾" 380 165 74.8
10' x 10' 305 x 305 146¾" 373 168 76.2
9' x 12' 274 x 366 170¼" 434 189 85.7
12' x 12' 366 x 366 175¼" 445 194 88
*Case length does not include lange
Tensioned Advantage
®
Deluxe Electrol
®
Automatic Electric Projection Screen Model