Installation Guide

Items needed for installation:
• 2 1/2" long construction screws
• Wood shims
• Level
• Phillips Tip Screwdriver
Installation Guide for the Vanity Cabinet:
1.
Level cabinet front to back and side to side, use shims if necessary.2.
3.
4.
5.
Cabinet is now ready for countertop and plumbing installation.
6.
If door gap needs adjustment, even gap using Hinge Adjustment Guide.
Installation Guide Vanity Top:
1. Remove cabinets from packaging and arrange together in the correct order of installation.
2. Carefully match cabinet fronts together and clamp using soft jawed clamps. Pre-drill two 1/8” holes
through the inside of one cabinet and insert 1-1/4” screws through the holes securing the cabinets
together. Mount cabinets to wall and install Stretcher as in Step 1 and Step 2 above.
INSTALLATION GUIDE
Exclusively Designed • INTERNATIONALLY RECOGNIZED
Vanity Package
Please install this product according to the installation guide and all local plumbing codes.
D’VONTZ • 7208 EAST 38th STREET • TULSA, OKLAHOMA 74145 • 918.622.3600 • FAX [phone] • WWW.DVONTZ.COM
If you have any trouble during the installation of your D’Vontz cabinet, please call our Customer Service department at
877-322-3600.
Thank You for choosing D’Vontz.
• Clear Silicone Caulk
Before you begin please read and familiarize yourself with this installation guide. Consult
professional help if needed.
• Cloth Towels
Cut openings in cabinet back to allow drain and water supply lines access into cabinet.
• Hole Saw
Attatch cabinet to wall with construction screws.
a spot of clear silicone adhesive on each corner of stretcher top. Carefully set Marble Vanity Top into
place making sure Vanity Top is centered left to right and flush with back of stretcher.