Quick Installation Guide

Tap Add a Device from the navigation

menu on the left-hand side. Scan the

Setup Code on the Quick Installation Card

and follow the on-screen instructions to

complete the setup.

2 3 4

Download The App Log In Add The Device

Wall Anchor x1

DSP-W320

Outdoor Wi-Fi Smart Plug

Quick Installation Card

Screw x1

Quick Installation Guide

Plug It In

Plug the smart plug into a power outlet.

Wait until the LED on the front changes

from red to flashing amber.

Existing Users:

New Users:

Tap Sign Up to register for a mydlink account.

Download the mydlink app by searching for "mydlink" on the App

Store or Google Play

Note: This product is NOT COMPATIBLE with the other mydlink

apps. Please install the app titled only "mydlink."

If you are a mydlink Lite user, sign in to the new app with the same

username and password and your existing cameras will appear in the

new app.

mydlink

Outdoor Wi-Fi Smart Plug

Quick Installation Guide

DSP-W320

PAGE 1
DSP-W320 1 Outdoor Wi-Fi Smart Plug Plug It In 2 Download The App 3 Log In 4 Add The Device Quick Installation Guide DSP-W320 Outdoor Wi-Fi Smart Plug mydlink New Users: Tap Sign Up to register for a mydlink account. Wall Anchor x1 OR Screw x1 Quick Installation Card Quick Installation Guide Plug the smart plug into a power outlet. Wait until the LED on the front changes from red to flashing amber. Download the mydlink app by searching for "mydlink" on the App Store or Google PlayTM.
PAGE 2
Mounting 1/ 2/ 3/ 4/ i Place at the desired location at least 2 feet from the ground. Use a pencil to mark the hole behind the mounting tab. Use a 15/64" drill bit to drill a 1-inch deep hole over the pencil mark. Insert the plastic anchor to support the screw. Twist the screw into the anchor. Leave 1/4" of the screw exposed from the wall. Align the screw with the hole on the mount. Slide the mount down to lock into place, allowing it to hang. Do not over tighten the screw.