User's Manual

39D-Link DIR-815 User Manual
Section 3 - Conguration
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the
next box.
Enter the ISP Service Name (optional).
Use the radio buttons to specify the reconnect mode. The user can
specify a custom schedule or specify the On Demand, or Manual
option.
To specify a custom schedule, use the drop-down menu to select
one of the schedules that has been dened in the Tools> Schedules
window. To create a new schedule, click the New Schedule button
to open the Tools> Schedules window. Refer to “Schedules” on
page 83 for more information.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static
PPPoE only).
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect
Mode:
Manual Internet Connection Setup
Russia PPPoE (Dual Access)
Select PPPoE (Username/Password) GSPNUIFESPQEPXONFOVJGZPVS*41VTFTB111P&DPOOFDUJPO:PVS*41XJMMQSPWJEFZPV
with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from
your computer. The software is no longer needed and will not work through a router.
.BYJNVN*EMF
Time:
DNS Addresses: