User Manual

13
Configuration
Using the Configuration Utility (continued)
Wireless Mode:
SSID:
Service Set Identifier is a name that identifies a wireless network. Access points
and wireless devices attempting to connect to a specific WLAN (Wireless Local
Area Network) must use the same SSID. The default setting is default.
Click on the pull-down menu; select from the following options:
Infrastructure - connecting to the WLAN using an access point. (This is
the default setting).
Ad-Hoc – wireless mode used when connecting directly to a computer
equipped with a wireless adapter in a Peer-to-Peer environment.
Tx Rate:
The default setting is Auto; Tx Rate settings are automatically determined
for an optimal speed up to a maximum of 54Mbps.
Channel:
The default setting is Auto. The channel selection is automatically detemined
by the DWL-G122.