AC1300 MU-MIMO Wi-Fi Nano USB Adapter DWA-181 Quick Install Guide
Package Contents DWA-181 AC1300 MU-MIMO Wi-Fi Nano USB Adapter CD with drivers and manual Quick Install Guide If any of the above items are missing, please contact your reseller. System Requirements • • • • An available USB slot Windows® 10, 8, 7, macOS 10.13 An 802.11ac, 802.11n, or 802.11g wireless network CD-ROM Drive Before You Begin Before installing your new D-Link wireless adapter, please verify the following: • Remove any previous installations of wireless adapters.
Installation - Windows® 10 WARNING: Do NOT plug the adapter into your computer before installing the drivers. You will be prompted to plug in your adapter during the setup. 1 Insert the DWA-181 Driver CD into the CD drive. When the autorun screen appears, click Install and follow the on-screen instructions. Note: If the CD Autorun function does not automatically start on your computer, press the Windows Key + “R”. In the run box type “D:\autorun.
The drivers will now be installed. This process may take a minute to complete. 5 Once the InstallShield Wizard Complete screen appears, the DWA-181 has been successfully installed. Click Finish to exit the Install Wizard. 6 Click on the Wi-Fi Connection icon in the bottom right corner of the screen. Select the wireless network you want to connect to. Please enter the password for your wireless network if prompted. You are now connected to your wireless network.
Notes 5
Notes 6
Notes 7
Technical Support This guide is only for the first time configuration. Refer to the user manual to learn more, or visit http://support.dlink.com for more information. Also feel free to contact us via chat or email through our website. USA http://support.dlink.com/DWA-181-US Version 1.00 (US)_90x130 March 25, 2019 5300-00007526-01W ©2019 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link.
