Installation Guide

CONCRETE CURING COVERS

Cure Right

Stronger

Increased Durability

Smoother Surface

Cure Rights maintain a constant

level of moisture that is critical

for curing properly.

Cure Rights prohibit the entry

of debris and contminants which

compromise surface smoothness.

Cure Rights prevent moisture from

evaporating too quickly, which is the

main cause of cracking.

Common curing Problems

Surface Scaling

Scaling is caused by road salts

penetrating the surface due to

improper curing methods.

Cracking

Crazing

Concrete can crack for a number

of reasons. Incorrect moisture content

when curing is a more than likely a key

contributor to the problem.

Crazing is a network of ne surface

cracks. This is caused by shrinkage of

the surface layer, which is a direct

result of rapid evaportation.

why use Cure Right?

Dimensions

25ft x 30in

63sq ft area

- Driveways

- Patios

- Walkways

Applications

Up to 50% INCREASE IN STRENGTH

PAGE 1
Cure Right CONCRETE CURING COVERS Dimensions 25ft x 30in 63sq ft area Applications - Driveways - Patios - Walkways Up to 50% INCREASE IN STRENGTH vs why use Cure Right? Common curing Problems Stronger Surface Scaling Cure Rights maintain a constant level of moisture that is critical for curing properly. Scaling is caused by road salts penetrating the surface due to improper curing methods.
PAGE 2
Instructions Step 1 USe plenty of water Spray water on and around the first area that will be covered with CURE RIGHT. At least 1/8” - 1/4“ of water is required. Step 2 Roll out CURE RIGHT Place the roll on the wet surface with the plastic side up and absorbent side down. Unroll the cover in a straight line. Spray additional water as needed. Step 3 Remove any wrinkles Using a paint roller, smooth out any wrinkles and air pockets. Be sure to roll toward the un-covered portion of the surface.