Product Manual B

3. Wiring5-2019

• The Reset button is used to select menu options and to clear fault messages.

• The status LED is displays the appropriate color for the following conditions.

◦ Green - On solid indicates unit is charging

◦ Amber - On solid indicates Equalizing

◦ Red - On solid indicates a fault condition. The fault number is shown on the digital display.

Optional Battery Temperature Sensor - A connector for an optional battery temperature sensor is located

on the front of the battery charger. When used to monitor battery temperature, the optional battery

temperature sensor is connected from the battery charger to the positive terminal of the battery. A fault

message (fault code 2263) is displayed if the battery temperature is too high (reaches 131 degrees F (55

degrees C)).

Battery Charger Configuration - The RESET button on the control panel (see Figure 21) is used to

configure the battery charger, (More information on Setup menus is included in the Battery Charger

Operator's Manual .)

• Battery Voltage and Type - The battery charger must be correctly configured, using the Setup

menus, for the correct battery voltage and type before it is connected to the battery. The battery

voltage can be set for 12 or 24 VDC (default = 12 VDC). The battery type can be set for Lead-Acid,

Gel, or AGM batteries (default = Lead-Acid) .

NOTICE

A factory installed battery charger is set up for the proper DC battery voltage requested on

the production order, with the Lead-Acid battery type selected as the default.

• Battery Equalization - Battery equalization is available for lead-acid batteries that are completely

charged, using the Equalize Battery screen in the Setup menus. When batteryequalization is in

process, the LED status indicator turns amber.

No. Description No. Description

1 Reset Button 3 LED Status Indicator

2 Digital Display

FIGURE 21. 15/12-AMP CHARGER CONTROL PANEL